On Mon, 02 Jan 2012 22:45:36 -0500, Dennis Nezic wrote: > On Tue, 3 Jan 2012 03:13:24 +0000 (UTC), user1 wrote: >> I am using ubuntu 8.04 and fit-pc will not let me upgrade to newer >> ubuntu version. > > Are you referring to Freenet or Ubuntu? :p I cannot upgrade to newer ubuntu versions > >> I have reinstalled freenet with a bigger new datastore It is >> supposed just to run as a freenet server It has been running >> for a couple of years without problems When i reboot it starts >> all right and I want to let it run 24 >> hours/day >> After maybe an hour is says "Unable to connect.... try again" > > So it does work, for a little bit? :) The last few lines of your > freenet/wrapper.log file should be informative. My guess is you're > running out of memory -- so I bet there's a huge thread dump at the end > of that file, at the top of which there is a little line saying "out of > memory", or something. Perhaps increasing your datastore increased your > memory requirements too far. Try a smaller datastore size. Does not show "out of memory" But says: "Error JVM appears hung: Timed out waiting for signal from JVM JVM did not exit on request Unable to start JVM > >> Then I have to restart and same repeats At most I had 7 nodes >> connected for a very short period >> >> Hardware fit-PC 1.0: >> CPU: AMD Geode LX800 500MHz >> Chipset: AMD CS5536 >> Display: Integrated Geode LX display controller up to >> 1920x1440 Memory: 256MB DDR 333MHz soldered on-board >> Hard disk: 2.5” IDE 60GB >> Ports: >> 2 x RJ45 Ethernet ports 100Mbps >> 2 x USB 2.0 HiSpeed 480Mbps >> RJ11 RS-232 (cable available from CompuLab) VGA DB15 >> Stereo line-out audio (headphones) >> Stereo line-in audio / Mic > > Cool machine. How much? :D Using 11W http://www.fit-pc.com/web/
_______________________________________________ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
