Lynn Nguyen wrote: > I tried the sequence but still the same errors. > > Should I have a /dev/ttyUSB1 when I plug in the debug board? because i > dont...
You should, as long as you have the ftdi_sio module loaded with the right vendor/product IDs for the debug board (0x1457/0x1458). Here's what I see when I plug in my debug board v2: usb 1-2: new full speed USB device using uhci_hcd and address 5 usb 1-2: new device found, idVendor=0451, idProduct=2046 usb 1-2: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 1-2.1: new full speed USB device using uhci_hcd and address 6 usb 1-2.1: new device found, idVendor=1457, idProduct=5118 usb 1-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2.1: Product: Debug Board for Neo1973 usb 1-2.1: Manufacturer: OpenMoko usb 1-2.1: configuration #1 chosen from 1 choice ftdi_sio 1-2.1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: Detected FT2232C usb 1-2.1: FTDI USB Serial Device converter now attached to ttyUSB0 ftdi_sio 1-2.1:1.1: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: Detected FT2232C usb 1-2.1: FTDI USB Serial Device converter now attached to ttyUSB1 _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support