OK, I got the latest version from the URL below..
I changed the line from sis1 to ng0 in /tmp/rules.debug
I ran:
# pfctl -f /tmp/rules.debug
pfctl: ng0: driver does not support altq
As you can see I still get the same error.
Todd
----- Original Message -----
From: "Scott Ullrich" <[EMAIL PROTECTED]>
To: <support@pfsense.com>
Sent: Wednesday, October 26, 2005 4:11 PM
Subject: Re: [pfSense Support] Traffic Shaping, killing my DSL link speed to
less than 100k
Grab the latest version which does support ALTQ on NG0.
http://www.pfsense.com/~sullrich/
Repeat tests and report back what Dan is looking for.
On 10/26/05, Mojo Jojo <[EMAIL PROTECTED]> wrote:
Hmmm...
Since I turned shaper back off.. I had to turn it back on, I noticed that
my
changes to /tmp/rules.debug had gone away so I put the ng0 back on the
line
where it belongs.
After doing so, I ran:
# pfctl -f /tmp/rules.debug
pfctl: ng0: driver does not support altq
and you see what I am getting.
So...
What now?
Todd
----- Original Message -----
From: "Dan Swartzendruber" <[EMAIL PROTECTED]>
To: <support@pfsense.com>
Sent: Wednesday, October 26, 2005 3:53 PM
Subject: Re: [pfSense Support] Traffic Shaping, killing my DSL link speed
to
less than 100k
> At 04:51 PM 10/26/2005, you wrote:
>>OK, I did it and my link is still hosed.
>>
>>Do you want me to run any of those commands again or anything else now
>>that I have reloaded the rules?
>
> yes, please send 'pfctl -sq' now that you reloaded 'em.
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
