And gstat reports full use of hdd..
So no way to tweak this, right ? Unless i change the hdd :(
dT: 0.505 flag_I 500000us sizeof 240 i -1
L(q) ops/s r/s kBps ms/r w/s kBps ms/w %busy Name
0 0 0 0 0.0 0 0 0.0 0.0| gzero
13 85 18 36 29.9 67 887 44.6 98.5| ad0
13 85 18 36 29.9 67 887 45.2 98.7| ad0s1
13 85 18 36 30.0 67 887 46.4 99.2| ad0s1a
0 0 0 0 0.0 0 0 0.0 0.0| ad0s1b
0 0 0 0 0.0 0 0 0.0 0.0| ad0s1c
On 12/27/05, Szasz Revai Endre <[EMAIL PROTECTED]> wrote:
It doesn't seem to know anything, no features :)
Protocol ATA/ATAPI revision 0
device model WDC AC22100H
serial number WD-WM3612166806
firmware revision 12.07H12
cylinders 4092
heads 16
sectors/track 63
lba supported 4124736 sectors
lba48 not supported
dma supported
overlap not supported
Feature Support Enable Value Vendor
write cache no no
read ahead no no
Tagged Command Queuing (TCQ) no no 0/0x00
SMART no no
microcode download no no
security no no
power management no no
advanced power management no no 0/0x00
automatic acoustic management no no 0/0x00 0/0x00
On 12/27/05, Szasz Revai Endre <[EMAIL PROTECTED] > wrote:# atacontrol mode ad0
current mode = WDMA2
WDMA? what's that?
anyway max it goes, it's this :(
This is a 2gb western digital caviar hdd.
ad0: 2014MB <WDC AC22100H 12.07H12> at ata0-master WDMA2
Better than PIO I guess..
