Gah, patch command isn't in the wrap version... Guess I will need to wait for the img...
John -----Original Message----- From: John Cianfarani [mailto:[EMAIL PROTECTED] Sent: Saturday, February 25, 2006 8:02 PM To: support@pfsense.com Subject: RE: [pfSense Support] Traffic Shaper - VoIP I'm willing to test it out how do I apply this patch? Do I just copy it into the root and something like: patch -p0 < 20060225-shaper-fixes.diff Thanks John -----Original Message----- From: Bill Marquette [mailto:[EMAIL PROTECTED] Sent: Saturday, February 25, 2006 6:18 PM To: support@pfsense.com Subject: Re: [pfSense Support] Traffic Shaper - VoIP Thanks for the update. I just spent a number of hours on the shaper and think I found the problem. This does appear to be an OS level bug but I've sort of worked around it in our config. Beta 2 is just around the corner, the fixes, which require the wizard to be re-run (I've enforced this for those upgrading), will show up there (or if anyones willing to apply a patch - http://www.pfsense.com/~billm/20060225-shaper-fixes.diff - requires re-running of wizard and possible reboot). I removed the upperlimit setting from the wizard - it's still available in the UI for those that wish to break their config as I'm hoping we'll get some resolution from the FreeBSD side on this soon. --Bill On 2/25/06, John Cianfarani <[EMAIL PROTECTED]> wrote: > > > > Finally got around to testing the shaper again today with VoIP on snapshot > 02-19-06. > > > > Tried several things but I could not make it work. > > > > Setup is as follows: > > 4mbit/800kb cable modem, nothing else connected but a wrap pfsense and 1 > phone. > > Phone is using SIP to connect to a remote asterisk box in a colo center > codec is g711. > > > > Inside: LAN > > Download: 4000 > > Outside: WAN > > Upload: 600 (was a little more conservative with this number) > > Check prioritize voice, type = asterisk and allotted BW of 256Kbits. > > Nothing else selected just next to the end. > > > > > > Tested a fews calls just to the asterisk box (like voice mail) and the voice > stutters several times a second. After a few calls after about 5-8secs it > would clear up for maybe 2seconds and then resume stutter. This is a the > same issue I've seen all my tests of the traffic shaper in the past. > > Watching the traffic queue screen during a call shows the qVOIPup and > qVOIPDown queues with about 15kb or so each and the drops just keep counting > higher. The qlandef and qwandef both show small amount of traffic of a few > 1-2 kb a sec and no drops. All other queues show 0 traffic and 0 drops. > > If I turn off the shaper the voice is perfect again. > > > > If you need any more information just ask. I can probably even setup a > temporary asterisk box if you need to connect to test stuff out. > > > > Thanks > > John Cianfarani --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
