phantom rule is inserted on my system config.xml <rule> <type>pass</type> <interface>opt3</interface> <max-src-nodes/> <max-src-states/> <statetimeout/> <statetype>keep state</statetype> <os/> <max-src-conn-rate/> <max-src-conn-rates/> <source> <any/> </source> <destination> <any/> </destination> <descr/> </rule>
there were error(s) loading the rules: /tmp/rules.debug:393: syntax errorpfctl: Syntax error in config file: pf rules not loaded - The line in question reads [393]: label "USER_RULE" ... # /tmp/debug.rules pass in quick on $wan proto udp from any to { 10.0.1.3 } port = 4712 keep state queue (qwandef, qwanacks) label "USER_RULE: NAT LAN" pass in quick on $wan proto udp from any to { 10.0.1.3 } port = 2213 keep state queue (qwandef, qwanacks) label "USER_RULE: NAT RAID" ------>>>>> label "USER_RULE" <<<<<------------ # opt3 array key does not exist for label "USER_RULE" partial dmesg fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xe4800000-0xe4800fff,0xe4000000-0xe40fffff irq 9 at device 9.0 on pci1 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:3a:42:f2 dc0: <82c169 PNIC 10/100BaseTX> port 0xd400-0xd4ff mem 0xe3800000-0xe38000ff at device 10.0 on pci1 miibus1: <MII bus> on dc0 bmtphy0: <BCM5201 10/100baseTX PHY> on miibus1 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:a0:cc:5a:14:dd xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xe3000000-0xe300007f irq 11 at device 11.0 on pci1 miibus2: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus2 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:01:02:38:ff:81 xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xb800-0xb87f mem 0xe2800000-0xe280007f irq 5 at device 12.0 on pci1 miibus3: <MII bus> on xl1 ukphy0: <Generic IEEE 802.3u media interface> on miibus3 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:01:03:df:83:3f *** Welcome to pfSense RELENG_1_SNAPSHOT_04-08-2006-pfSense on cerberus *** WAN* -> fxp0 -> 192.168.33.2 OPT2(OPT2) -> dc0 -> NONE LAN* -> xl0 -> 10.0.1.1 OPT1(OPT1) -> xl1 -> NONE -- -=-=-=-=-=-=-=-=-=- William David Armstrong <----. Of course it runs Bio Systems Security.Networking <----|============================ Hinodeinfo Soluções em Informática <----' NetBSD, OpenBSD or FreeBSD ICQ 27550645 MSN / GT Ψ biosystems ∆ gmail . com Ψ --------------------------------------