On 4/23/06, Anders D. Hansen <[EMAIL PROTECTED]> wrote: > On Apr 20, 2006, at 18:12 , Scott Ullrich wrote: > >> > >> I have Beta1 running on an embedded device and want to replace this > >> box with a server running Beta3. > >> Can I import the configuration from Beta1 and install this on the new > >> server running Beta3 without problems or do you recommed I start from > >> scrach? > > > > Yes, should not be a problem to go this route. > > > > Nice, it worked pretty well - all I had to do after the import was to > remap the interfaces because they were no longer called sis0 and so on. > When I tested the new firewall the rules seemed to work both > incoming, outgoing and between DMZ zones but the servers could not > initiate traffic to the outside world. > > I could trace the outgoing traffic but somehow they did not get a > response back? I use 1:1 NAT by the way... > > What can I have been missing? Any ideas?
You have rules on the OPT interfaces? By default we block everything on all interfaces except for LAN. --Bill --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]