Yeah I know, I know .. RTFM ... I read everything can't figure it out.
lan = 192.168.1.253
wan = 202.37.230.93 (pppoe)
opt1 = 203.96.212.68
Firewall->NAT->Outbound
Int Source Source Port Dest Dest Port
NAT Add NAT Port Static Port
OPT1 192.168.1.0/24 * * *
* * NO
WAN 192.168.1.0/24 * * *
* * NO
Services->Load Balancer
Name Servers/Gateways
Port Monitor Description
LoadBalancetoWAN 202.37.230.93/210.48.22.38
203.96.212.1/203.96.212.1
Note:
In the wiki it says
"in the IP box type in the IP address of the gateway (this has to be
one of the gateways configured at WAN or OPTx's)"
I read this to mean use the gateway IP rather than the interface
IP .. was I right?
Firewall->Rules->LAN
Proto Source Port Dest Port Gateway
* LAN Net * * *
*
So to my knowledge everything should be setup correctly.
so a quick test.
links -source http://www.whatismyip.com | grep -i TITLE\> | sed "s/
<title>//I" | sed "s/<\/title>//I" | sed "s/WhatIsMyIP.com\ -\ //"
202.37.230.93
I would expect the ip to change every now and then .. but it has
never changed
Can some one point out what I am doing wrong?
Thanks
Paul.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]