Dave, its under firewall->Virtual IP's
It's interesting but as I mentioned before I tried to get proxy ARP
to work but couldn't get pfsense to respond to "who has" arp requests
for any IP other than the WAN.
Does anyone know if some network cards are just so shitty (rl0) that
they will now work with proxy ARP?
I would assume it has to do with the kernel and not the network card.
On 03/07/2007, at 1:41 PM, Dave Cabot wrote:
How do I do that exactly? I thought ARP was self-discovery.
Dave
-----Original Message-----
From: Tim Dickson [mailto:[EMAIL PROTECTED]
Sent: Monday, July 02, 2007 8:13 PM
To: support@pfsense.com
Subject: RE: [pfSense Support] Multiple IPs
You will need to set arp up because your firewall needs to say "hey
I'm
here... send these packets to me"
After you do that you may need to power cycle your router to clear
it's arp
cache.
It works great... use it on all my sites.
-Tim
-----Original Message-----
From: jai lamerton [mailto:[EMAIL PROTECTED]
Sent: Monday, July 02, 2007 5:22 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] Multiple IPs
I was unsuccessful in achieving this type of setup, which is
strange as it
seems it should be very possible.
According to that link I don't need to add the IP addresses as
proxy ARP, It
should just work with 1:1 NAT. I might have another go with just
the NAT.
I would be interested to know how you went.
Cheers.
On 03/07/2007, at 2:29 AM, sai wrote:
On 7/2/07, Dave Cabot <[EMAIL PROTECTED]> wrote:
How does pfS handle multiple IPs on the WAN interface? Would it
just
be filter rules or the port fowarding?
My ISPs gateway will be x.x.x.145. I've got x.x.x.146-x.x.x.150
(netmask
255.255.255.248) I'll set the WAN port to x.x.x.150, but I need it
to receive the packets for all 5 IPs. I need to be able to forward
based off of IP and port to whatever server inside the LAN. Is this
doable?
Its doable. See http://doc.m0n0.ch/handbook/examples.html#id2603650
pfSense is based on m0n0 and this should help you get started.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED] For
additional
commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED] For additional
commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED] For additional
commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]