The IP's are in the same subnet right? If you can use the ip's bypassing pfSense, then pfSense can use the IP's.
Add them to the Virtual IP's list, apply your settings and then reboot the router (not pfSense, fyi...maybe that is where you have been stuck) What this does is pfSense now answers for the IP's you've added to the list. If they are usuable, then pfSense will respond to them. IF you are still having trouble, power down your router for a longer period of time. It is necessary for it to clear it's cache and resend it's arp requests so pfSense can respond. I guarantee it is not an issue with pfSense I have it working on every install I've done (that needed multiple IP's that is) -Tim -----Original Message----- From: Dave Cabot [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 03, 2007 6:10 PM To: support@pfsense.com Subject: RE: [pfSense Support] Multiple IPs Didn't work. What can we do to collect info in order to determine what the actual problem is? If it's the kernel, we need to know so a patch may be done. Dave -----Original Message----- From: Tim Dickson [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 03, 2007 4:40 PM To: support@pfsense.com Subject: RE: [pfSense Support] Multiple IPs And be sure to reboot your router! Sometimes the cache time is reallllly long -tim -----Original Message----- From: Dave Cabot [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 03, 2007 3:16 PM To: support@pfsense.com Subject: RE: [pfSense Support] Multiple IPs I did try that and as you said, it doesn't work. I'm going to try to switch interfaces and see if it'll work on the vr0 device. (currently using a rl0). Thanks, Dave -----Original Message----- From: jai lamerton [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 03, 2007 12:37 AM To: support@pfsense.com Subject: Re: [pfSense Support] Multiple IPs Dave, its under firewall->Virtual IP's It's interesting but as I mentioned before I tried to get proxy ARP to work but couldn't get pfsense to respond to "who has" arp requests for any IP other than the WAN. Does anyone know if some network cards are just so shitty (rl0) that they will now work with proxy ARP? I would assume it has to do with the kernel and not the network card. On 03/07/2007, at 1:41 PM, Dave Cabot wrote: > How do I do that exactly? I thought ARP was self-discovery. > > Dave > > -----Original Message----- > From: Tim Dickson [mailto:[EMAIL PROTECTED] > Sent: Monday, July 02, 2007 8:13 PM > To: support@pfsense.com > Subject: RE: [pfSense Support] Multiple IPs > > You will need to set arp up because your firewall needs to say "hey > I'm here... send these packets to me" > After you do that you may need to power cycle your router to clear > it's arp cache. > It works great... use it on all my sites. > -Tim > > -----Original Message----- > From: jai lamerton [mailto:[EMAIL PROTECTED] > Sent: Monday, July 02, 2007 5:22 PM > To: support@pfsense.com > Subject: Re: [pfSense Support] Multiple IPs > > I was unsuccessful in achieving this type of setup, which is strange > as it seems it should be very possible. > According to that link I don't need to add the IP addresses as proxy > ARP, It should just work with 1:1 NAT. I might have another go with > just the NAT. > > I would be interested to know how you went. > > Cheers. > > On 03/07/2007, at 2:29 AM, sai wrote: > >> On 7/2/07, Dave Cabot <[EMAIL PROTECTED]> wrote: >>> How does pfS handle multiple IPs on the WAN interface? Would it >>> just be filter rules or the port fowarding? >>> >>> My ISPs gateway will be x.x.x.145. I've got x.x.x.146-x.x.x.150 >>> (netmask >>> 255.255.255.248) I'll set the WAN port to x.x.x.150, but I need it >>> to receive the packets for all 5 IPs. I need to be able to forward >>> based off of IP and port to whatever server inside the LAN. Is this >>> doable? >>> >>> >> >> Its doable. See http://doc.m0n0.ch/handbook/examples.html#id2603650 >> >> pfSense is based on m0n0 and this should help you get started. >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] For >> additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
