On 1/24/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hello, > > I am attempting to install pfSense on a 2 GB CF card for use on a PC > Engines motherboard without video (alix2c3.) > > I have used the live disc under VMWare and connected the card via USB > reader. Everything works great and the install begins, but then hangs > forever (overnight at least) at 35%, which is: > /usr/local/bin/cpdup -vvv -I -o /usr /mnt/usr > > I have tested the card and reader extensively; everything works. I > have re-attempted the above process several times. > > How do I work around this? > > Also, how do I put reasonable settings onto here, so that I can avoid > setting up a console with my alix board? I'd prefer to have simple > DHCP auto-configuration on at least one NIC and SSH/HTTP admin access > working immediately after booting.
That portion of the installer takes quite a while depending on speed of the CF card, etc. Give it a bit longer. Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]