Hello! As the title says, I'm experiencing watchdog timeouts on interfaces when I have a full installation of 1.2-RELEASE but I do not experience the same problem when I'm running an embedded installation. The full install seems to run fine until I start pushing some traffic(only 1.5mbits ADSL) through it. Then, the logs and console get cluttered with "watchdog timeout" errors like this:
Mar 24 13:43:42 php: : Not a valid interface action "" Mar 24 13:43:42 php: : Processing - Mar 24 13:43:42 php: : Not a valid interface action "" Mar 24 13:43:42 php: : Processing start - Mar 24 13:43:42 php: : DEVD Ethernet attached event for xl0 Mar 24 13:43:42 php: : Processing xl0 - start Mar 24 13:43:41 check_reload_status: rc.linkup starting Mar 24 13:43:37 kernel: xl0: link state changed to UP Mar 24 13:43:35 kernel: xl0: link state changed to DOWN Mar 24 13:43:35 kernel: xl0: watchdog timeout As soon as I change back to an embedded install, everything works just fine. I can completely saturate the 100mbit ports and have no problems. Is there a difference between the embedded and full installations that would cause an issue such as this? Hardware specs: Dell Optiplex GX200 SFF (800MHZ PIII, 384MB RAM, 20GB IDE HDD, all other peripherals disabled such as sound, com2, parallel, usb, etc) 1 x onboard 3COM 3C905 NIC (xl0) 4 x Sun Happy Meal NICS (Sun PCI QFE NIC) (hme0-3) 2 x Compaq Netelligent NICS (Compaq PCI Dual port Server NIC) (tl0-1) I appreciate any help you can give. Thank you! Tim Nelson Systems/Network Support Rockbochs Inc. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
