Try booting with ACPI disabled. See the Wiki for details on how to make
it permanent.
-mOjO
Tim Nelson wrote:
Hello! As the title says, I'm experiencing watchdog timeouts on interfaces when I have a
full installation of 1.2-RELEASE but I do not experience the same problem when I'm
running an embedded installation. The full install seems to run fine until I start
pushing some traffic(only 1.5mbits ADSL) through it. Then, the logs and console get
cluttered with "watchdog timeout" errors like this:
Mar 24 13:43:42 php: : Not a valid interface action ""
Mar 24 13:43:42 php: : Processing -
Mar 24 13:43:42 php: : Not a valid interface action ""
Mar 24 13:43:42 php: : Processing start -
Mar 24 13:43:42 php: : DEVD Ethernet attached event for xl0
Mar 24 13:43:42 php: : Processing xl0 - start
Mar 24 13:43:41 check_reload_status: rc.linkup starting
Mar 24 13:43:37 kernel: xl0: link state changed to UP
Mar 24 13:43:35 kernel: xl0: link state changed to DOWN
Mar 24 13:43:35 kernel: xl0: watchdog timeout
As soon as I change back to an embedded install, everything works just fine. I
can completely saturate the 100mbit ports and have no problems. Is there a
difference between the embedded and full installations that would cause an
issue such as this?
Hardware specs:
Dell Optiplex GX200 SFF (800MHZ PIII, 384MB RAM, 20GB IDE HDD, all other
peripherals disabled such as sound, com2, parallel, usb, etc)
1 x onboard 3COM 3C905 NIC (xl0)
4 x Sun Happy Meal NICS (Sun PCI QFE NIC) (hme0-3)
2 x Compaq Netelligent NICS (Compaq PCI Dual port Server NIC) (tl0-1)
I appreciate any help you can give. Thank you!
Tim Nelson
Systems/Network Support
Rockbochs Inc.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
