on the NIC's 2 are surplus realtek and not sure on the 3rd one. The lan
nic is on the realtek though. Might there be an issue with the nic
passing the vlan tagging even though the pfsense states only nics
capable of it are listed.
Curtis LaMasters wrote:
If you leave an untagged vlan on the pfsense interface, the traffic
will default to it. Not sure why that is.... The LAN interface
should say "VLAN 1 on bge0 (VLAN1)" ...if this is so then your other
VLAN's should follow suite. For the switchport connected to pfsense,
it should be tagged (Trunked in Cisco Terms) on all VLANs. After
those steps are completed, you should be able to plug in a host on the
switch with an untagged VLAN interface and be able to pass traffic.
There's probably other ways to do this but I do know this method works
100% of the time.
What NIC's are you running?
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]