It may be helpful to see your rulesets on your LAN and WAN interfaces... or paste the pertinent XML from your config file..
Tim Nelson Systems/Network Engineer Rockbochs Inc. (218)727-4332 x105 ----- "BSD Wiz" <[EMAIL PROTECTED]> wrote: > i'm connected via cable modem, mtu is set to 1500. > > thanks > > -phil > > > > On Oct 1, 2008, at 5:23 PM, Chris Buechler wrote: > > > On Wed, Oct 1, 2008 at 6:18 PM, BSD Wiz <[EMAIL PROTECTED]> wrote: > >> > >> pfSense 1.2.1 RC1 > >> > >> only add-on package installed is iperf. > >> > >> I have rules to allow allow traffic out on port 80 and 443. I have > > >> also(just > >> to be sure) allowed *ALL* traffic out from my static ip on my > >> macbook. > >> Problem is I can't get to the site subaru.com. > >> I don't see anything in the logs and I've never had a problem > >> getting to any > >> other site. If I telnet from the pfsense firewall to subaru.com > >> on port 80 > >> it get's connected. If i try that from my machine(laptop macbook) > > >> it times > >> out. > >> > >> am i missing something or what? > >> > > > > We don't like Subaru. ;) kidding > > > > sounds like a MTU issue, try lowering your MTU on WAN if you have > > PPPoE. > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]