hey this is getting worse we can't even get to the home page now we have to hit refresh over and over so we can get to the home page its running really slow I think just like dial up lol well I don't know what else to do I called our provider and they said everything seems to be good I connected a lap straight on the router and it loaded in 17 milliseconds any setting on the fire wall could be wrong or you think the computer where pfsence is installed it's not good enough the specs are 700 mhz 512 of ram and 100 mb/s nick cards let me know what you guys think
-----Original Message----- From: Juan Rivera Sent: Tuesday, April 14, 2009 9:44 AM To: support@pfsense.com Subject: [SPAM] [pfSense Support] RE: [SPAM] RE: [pfSense Support] RE: [SPAM] RE: [pfSense Support] RE: [SPAM] Re: [pfSense Support] RE: [SPAM] Re: [pfSense Support] website browsing Hey Tim here are the specs of the firewall its running on a 700 MHz processor 512 of ram and 2 100 MB nicks is an old gateway mid tower atx -----Original Message----- From: Tim Dickson [mailto:tdick...@calistogaranch.com] Sent: Monday, April 13, 2009 4:19 PM To: support@pfsense.com Subject: [SPAM] RE: [pfSense Support] RE: [SPAM] RE: [pfSense Support] RE: [SPAM] Re: [pfSense Support] RE: [SPAM] Re: [pfSense Support] website browsing It all depends on throughput levels - but yes, I can pretty much guarantee it can handle it. (1990's hardware can handle 70 users with modest throughput), but if you are curious - what are your specs? I was more wondering if you had a couple machines with malware that may be pegging out your connections state table, or some P2P users. Check your state table and make sure it isn't maxing out. And make sure if you have P2P users, that they aren't maxing out your bandwidth. Blank MTU in your config is fine - that means it will be at 1500 - which is the standard on most connections (at least in the US). You didn't answer if all was well when bypassing the pfSense box. If it is, then start segregating things. Try it with JUST your machine -> pfSense -> Modem, and see how that works... this is granting your box is malware free :) - if in doubt, grab an Ubuntu LiveCD (or variant) and boot it up on your machine to test. Good luck! -Tim -----Original Message----- From: Juan Rivera [mailto:jriv...@americancableco.com] Sent: Monday, April 13, 2009 12:57 PM To: support@pfsense.com Subject: [pfSense Support] RE: [SPAM] RE: [pfSense Support] RE: [SPAM] Re: [pfSense Support] RE: [SPAM] Re: [pfSense Support] website browsing Yeah just called my ISP they are checking on the modem to see if there is something wrong with it as the MTU was blank before I made any changes to it, now it got me thinking I have more than 70 computers connecting to my free BSD you think it can't handle that many ? -----Original Message----- From: Tim Dickson [mailto:tdick...@calistogaranch.com] Sent: Monday, April 13, 2009 2:54 PM To: support@pfsense.com Subject: [SPAM] RE: [pfSense Support] RE: [SPAM] Re: [pfSense Support] RE: [SPAM] Re: [pfSense Support] website browsing Sounds like you are pulling at straws here - but try and find out what the root of your problem is. If your packets are fragmented, then yes this will slow things down - but it could be totally irrelevant to your issue. If you bypass pfSense is everything fine? How do your traffic graphs look? (how many connections are you doing - check the state table) If it is in fact your MTU - check with your ISP on what your MTU should be, you'll want to leave it matching theirs as changing MTU will just cause MORE packet fragmentation where it isn't necessary, or causing more packets with less data. And if your MTU is correct, your traffic is minimal, and you are still having latency issues start a trace and find the routers your traffic is passing through. Then test the MTU levels to each router to find out which router is causing your fragmentation. You should then point your ISP to that router. The random MTU guess isn't going to get you anywhere. Just my 2cents though... -Tim -----Original Message----- From: Juan Rivera [mailto:jriv...@americancableco.com] Sent: Monday, April 13, 2009 11:12 AM To: support@pfsense.com Subject: [pfSense Support] RE: [SPAM] Re: [pfSense Support] RE: [SPAM] Re: [pfSense Support] website browsing ok I've done that but still the internet slow the MTU is not at 1400 but internet slow is there anything else that could be the problem -----Original Message----- From: Gary Buckmaster [mailto:g...@centipedenetworks.com] Sent: Monday, April 13, 2009 1:28 PM To: support@pfsense.com Subject: [SPAM] Re: [pfSense Support] RE: [SPAM] Re: [pfSense Support] website browsing This is not the way to do this as the configuration will not survive reboots. You can set the MTU on the interface configuration page for your WAN interface in the webGUI. I would encourage you to check that out. Mikel Jimenez Fernandez wrote: > Hi > > Yo have to reduce the MTU of interfaces > > ifconfig interface mtu 1380 for example > > Do it in LAN and WAN and tell me results > > Thanks > > Juan Rivera wrote: >> How did you reduce the MTU files? What is happening on my end is that >> when I download files it works perfectly fine but when I browse the >> internet it take a while to show the page and sometime we get PAGE CAN >> NOT BE DISPLAY its getting annoying now and getting a lot of complains >> form users can you tell me how to reduce the MTU files? Thank you >> >> -----Original Message----- >> From: Mikel Jimenez Fernandez [mailto:mi...@irontec.com] Sent: >> Monday, April 13, 2009 11:31 AM >> To: support@pfsense.com >> Subject: [SPAM] Re: [pfSense Support] website browsing >> >> Hello >> >> I have this issue and i solve it reducing de MTU values. >> >> Thanks >> >> Juan Rivera wrote: >> >>> Hi I'm having trouble trying to browse some websites it loads really >>> slow is there anything that can help us improve that? >>> >>> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: support-unsubscr...@pfsense.com >> For additional commands, e-mail: support-h...@pfsense.com >> >> Commercial support available - https://portal.pfsense.org >> >> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: support-unsubscr...@pfsense.com >> For additional commands, e-mail: support-h...@pfsense.com >> >> Commercial support available - https://portal.pfsense.org >> >> > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > > --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org