Hello all!
We have faced the following problem:
after the upgrade of pfSense from 1.2-Release to 1.2.3-RC1, the access from the
internal LAN1 network to FTP-server, located in DMZ, seized functioning (in both
modes: active/passive) (via the LAN2 network).
The scheme of access:
LAN1 --> Router (pfSense-box) -->LAN2 --> NAT (black-box) --> FTP-server.
We are allowed to authorise on ftp-server, but fail to get the directory
listing.
Turning on/off of the FTP-helper does not solve the problem.
After downgrade to 1.2-Release, the access to the same FTP functions
successfully.
What is the difference between the pfSense releases (1.2-Release vs. 1.2.3-RC1)
when working with FTP?
Do you have any ideas how to solve this problem?
Upgrade is performed as follows:
1. Current configuration is saved;
2. New pfSense release is implemented;
3. Configuration is restored from the backup.
Thank you.
WBR
Andrew
--
_
.-._.=\-.
(_)=='(_)
---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com
Commercial support available - https://portal.pfsense.org