Chris,
Thanks for your reply, I found this out earlier today. Yes, all of the
gateways are outside of the firewall so when I changed the IP on my
laptop after getting the firewall upgraded it was able to get out with
no problem.
Again, thank you for your reply. I appreciate it.
Joe
Chris Buechler wrote:
On Thu, Jun 25, 2009 at 3:43 PM, Joseph Hardeman<[email protected]> wrote:
Hi Everyone,
I have been trying to figure out how to setup multiple wan networks on a
single bridge.
For instance:
111.111.111.111/25 -> em0/bridge0/opt1 -> internal servers
222.222.222.222/25 -> em0/bridge0/opt1 -> internal servers
Nothing to it, if what you really need is a bridge. If the gateway IP
is outside the firewall, it's no different to use two subnets than it
is one. If the gateway IP isn't outside the firewall, you don't need
bridging, you need a routed public IP subnet on an OPT interface.
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
--
This message has been scanned for viruses by Colocube's AV Scanner
