On Fri, Jul 24, 2009 at 5:59 PM, Joseph L. Casale<jcas...@activenetwerx.com> wrote: >>yes but becareful with that rule, it allows anyone in the LAN to >>access anything in the internet and the OPT1, did you check the tagged >>ports and the untagged ones, as I stated in a previous email? > > Ok guys, I am waiting on Chris to get some paid support. In the meantime > I reconfigured some hardware and ran some tests. > > No more vlan config inside pfSense, I have 3 physical interfaces, lan, wan, > opt1. > wan is segmented off to a dsl which works, nat with lan is functioning. Opt1 > is > on a port that untags into vlan3. I *know* this works as I just hooked up a > rhel > host with an IP in the vlan 3 subnet that *does not* have vlan config and it > can > see hosts in vlan3. Opt1 has an ip in the vlan3 subnet but still no > connectivity. > > My rules are lan->* and opt1->*. > > I have no gateway configured on Opt1, no bridging, clients in vlan3 have their > gateway set to opt1's ip which is set to 192.168.2.1/32. > > What else can I check? > > Thanks for everything! > jlc >
I stated before in order to test connectivity with the opt1 whether is a vlan or a physical interface I enable the DHCP server and connect my laptop, why don't you try to do this? Again, are you sure your switch is configured correctly? Meaning if the ports are currently tagged/untagged, my setup is like this: ports 1-12 - LAN clients/no tagging ports 13-24 - VLAN3/untagged - OPT1 clients ports 26 - LAN/VLAN3/tagged(this is the port that is connected to the em1 interface port 25 - cascading port - LAN Hope it helps. -- Usuario Linux Registrado #452368 Usuario Ubuntu Registrado #28025 "Doing a thing well is often a waste of time." ---------------------------------------------------------------------------------------------------------------------------------- //Netbook - HP Mini 1035NR 2GB 60GB - Windows XP/Ubuntu 9.04 //Desktop - Core 2 Duo 1.86Ghz 8GB 500GB - Windows 7(testing) //Desktop - Core 2 Duo 2.40Ghz 8GB 320GB - MacOS Leopard //Desktop - Athlon 64 2.7Ghz 8GB 400GB - Ubuntu Jaunty //Server - Pentium D 3.2Ghz 8GB 1TB - Debian Lenny //Server - Celeron 1.8Ghz 1GB 160GB - Pfsense //Server - NSLU2 266Mhz 32MB 1TB - Debian Lenny --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
