Hello Chris Buechler,

--- On Sat, 12/9/09, Chris Buechler <[email protected]> wrote:
> From: Chris Buechler <[email protected]>
> Subject: Re: [pfSense Support] Help to make my pfSense fully working with VoIP
> To: [email protected]
> Date: Saturday, 12 September, 2009, 11:19 PM

> Likely one of 3 things here (I'm guessing #2)
> http://doc.pfsense.org/index.php/VoIP_Configuration
> 
> The link state is likely from vr bugs in 7.0 that are fixed
> in 7.1 and
> 7.2. For that reason, and #2 above, go with the latest
> 1.2.3 snapshot.

Today I've tried snapshot pfSense-1.2.3-1G-20090913-0939-nanobsd.img.gz, then 
updated to pfSense-1.2.3-1G-20090914-0214-nanobsd-upgrade.img.gz but I have two 
problems.

Serial console and System logs got flooded with this error message:
"kernel: ath0: stuck beacon; resetting (bmiss count 4)"

System console showed:

Sep 14 15:37:02 hostapd: ath0: STA WPA: group key handshake completed (RSN)
Sep 14 15:36:52 last message repeated 16 times
Sep 14 15:36:21 kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 14 15:36:13 check_reload_status: rc.linkup starting
Sep 14 15:36:09 kernel: vr1: link state changed to UP
Sep 14 15:36:07 kernel: vr1: link state changed to DOWN

It seems link state bug affecting vr interface is still found in latest 
snapshots. Wasn't it fixed?
Moreover, wifi doesn't work correctly: once a station got associated to the AP, 
it is unable to surf on the net.
I'm curious if any Alix owner experiences same issues.

I havne't found a sticky thread with issue affecting Nanobsd build in forum. 
Did I miss it?

I tried 1.2.3-RC1-embedded which seems to be old (23 April 2009) and I've also 
tried to update it by using pfSense-Embedded-Update-1.2.3-20090914-0132.tgz but 
it seems update isn't working on embedded. A further error about vr interface 
has been shown in System logs (tx/rx error and resetting interface).

I lost several hours with no improvements. I came back to 1.2.2. I will wait 
for next snapshots when these issues get fixed for sure.

Regards






---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]

Commercial support available - https://portal.pfsense.org

Reply via email to