On Mon, Sep 14, 2009 at 1:49 PM, tester <tester6...@yahoo.com> wrote: > > Today I've tried snapshot pfSense-1.2.3-1G-20090913-0939-nanobsd.img.gz, then > updated to pfSense-1.2.3-1G-20090914-0214-nanobsd-upgrade.img.gz but I have > two problems. > > Serial console and System logs got flooded with this error message: > "kernel: ath0: stuck beacon; resetting (bmiss count 4)" >
Wireless in FreeBSD 7.2 seems to have a lot of regressions from earlier versions. Try setting the channel rather than putting it on auto. > System console showed: > > Sep 14 15:37:02 hostapd: ath0: STA WPA: group key handshake completed (RSN) > Sep 14 15:36:52 last message repeated 16 times > Sep 14 15:36:21 kernel: ath0: stuck beacon; resetting (bmiss count 4) > Sep 14 15:36:13 check_reload_status: rc.linkup starting > Sep 14 15:36:09 kernel: vr1: link state changed to UP > Sep 14 15:36:07 kernel: vr1: link state changed to DOWN > > It seems link state bug affecting vr interface is still found in latest > snapshots. Wasn't it fixed? Yes it is, that message is normal during boot, I thought previously that was randomly coming up while in operation. > I tried 1.2.3-RC1-embedded which seems to be old (23 April 2009) and I've > also tried to update it by using > pfSense-Embedded-Update-1.2.3-20090914-0132.tgz but it seems update isn't > working on embedded. A further error about vr interface has been shown in > System logs (tx/rx error and resetting interface). > You can't upgrade the old embedded. --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org