Thanks Everyone! Actually I made it work, but not using the same monitoring address on both interfaces.
I chose an external DNS server for the WAN1 (200.221.11.100), and another one (the secondary) DNS server for the WAN2 (200.221.11.101), so it worked out! (of course I could use anything I wanted, Since they were different) Just for a test, try to monitor the same address on both link so disconnect the main one and wait for the gateway change. It doesn´t work. But if you use two different addresses it works really fine! By the way, it took 10 seconds at all to change the Gateway. really fast! Once again, Thanks a Lot! You guys are really good! PFSENSE is an AWESOME Multi-Purpose firewall. Congratulations! Cordially, Fabrício. De: Benjamin LAUGIER [mailto:[email protected]] Enviada em: terça-feira, 10 de agosto de 2010 14:19 Para: [email protected] Assunto: Re: [pfSense Support] Multi WAN - Failover doubts. My bad :-) But glad to hear that. In fact, it sounds that the version I was using a couple of weeks ago (beta 2 - build 20100601) had a limitation in the GUI : you couldn't declare a monitored IP on another network than the one declared on the local interface to monitor. Benjamin.
