I'm not sure if this is too low-level an answer, but...

Let's say you wanted to split your /22 into two /21s.
Instead of configuring the LAN interface with the /22, you could configure the 
LAN interface with the first /21 network, and create an OPT1 interface and 
configure it with the second /21.

Suppose you have obtained 10.10.8.0/22.  (Pretend it's publicly-routable 
address space for this explanation.)
Your provider has agreed to route that netblock for you.  (Regardless of which 
one of you advertises it.)
Your provider might assign 192.168.255.252/30 as the link to you, using .253 
for their end and .254 for your end.
Your WAN address will then be 192.168.255.254/30, your default gw would be 
192.168.255.253.

Suppose you needed to split your /22 into four (traditional class "C") /24s.
You might configure the LAN interface as 10.10.8.0/24, OPT1 as 10.10.9.0/24, 
OPT2 as 10.10.10.0/24, and OPT3 as 10.10.11.0/24.

Not sure if that's the level of example you're looking for or not...
-Adam Thompson
 athom...@c3a.ca


________________________________________
From: Chris Flugstad [ch...@cascadelink.com]
Sent: October-04-10 18:32
To: support@pfsense.com
Subject: Re: [pfSense Support] How do I break down a /22 into smaller subnets 
to use behind(LAN) side of my pfsense box

  I know how to make them smaller, but don't i need to set the smaller
subs in pfsense?  i wasnt specific i guess.

i know what smaller subnets would look like, but i'd think id have to
set them up in pfsense, so  I am asking something in which I havent done
before and therefor am lost ;)
-chris

On 10/4/2010 4:23 PM, David Burgess wrote:
> On Mon, Oct 4, 2010 at 5:19 PM, Chris Flugstad<ch...@cascadelink.com>  wrote:
>
>> -how to i break up the large block into smaller blocks
> Like this?
>
> http://www.vlsm-calc.net/
>
> db
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: support-unsubscr...@pfsense.com
> For additional commands, e-mail: support-h...@pfsense.com
>
> Commercial support available - https://portal.pfsense.org
>

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com

Commercial support available - https://portal.pfsense.org
---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com

Commercial support available - https://portal.pfsense.org

Reply via email to