If you start Pidgin, then exit and start it again (like in 10 seconds or less), how long dow it take?
On my system, the first start is 10-20 seconds (depends, I did not make an accurate measurement), but the second is instantenous (1 second or less). On first start the GTK libs have to be loaded from the disk and they are quite large. (and on the second try they are cached or even already loaded) Also the auto-connect that others mentioned should nt make a difference. The Buddy List window appears first and only then it starts connecting. Regards, David > -----Original Message----- > From: support-boun...@pidgin.im > [mailto:support-boun...@pidgin.im] On Behalf Of Mestl, Robert R > Sent: Monday, January 04, 2010 9:52 PM > To: Daniel Atallah > Cc: support@pidgin.im > Subject: RE: so slow > > Ok... here is the top portion of a debug file... from the > moment the .bat file starts to wpurple starting, it takes 19 > seconds (14:43:38 - 12:43:57). What do I need to do to > reset the missing registry keys/files? I currently have > v2.6.4 running. thx > > > > ------------------------------------------------- > Pidgin Debug Log For Mon 01/04/2010 14:43:38.55 > ------------------------------------------------- > Could not open reg subkey: SOFTWARE\GTK\2.0 > Error: (2) The system cannot find the file specified. > > > GTK+ path found: C:\Program Files\Common Files\GTK\2.0\bin > Using SetDllDirectory > Setting locale: LANG=en > Looking for Perl... Could not open reg subkey: SOFTWARE\Perl > Error: (2) The system cannot find the file specified. > > > not found. > Looking for MIT Kerberos... Could not open reg subkey: > SOFTWARE\MIT\Kerberos > Error: (2) The system cannot find the file specified. > > > not found. > (14:43:57) wpurple: shfolder.dll not already loaded; loading it... > (14:43:58) wpurple: This version of shfolder.dll contains > SHGetFolderPathW > (14:43:58) wpurple: Purple settings dir: C:\Documents and > Settings\ISDRRM\Application Data > (14:43:58) winpidgin: winpidgin_init start > (14:43:58) wpurple: Could not open reg key 'HKLM' subkey > 'Software\Aspell'. > Message: (2) The system cannot find the file specified. > (14:43:58) wspell: Couldn't find path for Aspell > (14:43:58) winpidgin: GTK+ :2.14.7 > (14:43:58) wpurple: This version of user32.dll contains FlashWindowEx > (14:43:58) winpidgin: winpidgin_init end > (14:43:58) wpurple: wpurple_init start > (14:43:58) wpurple: libpurple version: 2.6.4 > (14:43:58) wpurple: Glib:2.18.4 > (14:43:58) wpurple: wpurple_init end > > > > > > > > > Robert Mestl > Software Analyst, West Interactive Corporation > 402-716-0492 | Cell 402-305-0702 | rrme...@west.com > > > This electronic message transmission, including any > attachments, contains information from West Corporation which > may be confidential or privileged. The information is > intended to be for the use of the individual or entity named > above. If you are not the intended recipient, be aware that > any disclosure, copying, distribution or use of the contents > of this information is prohibited. > > If you have received this electronic transmission in error, > please notify the sender immediately by a "reply to sender > only" message and destroy all electronic and hard copies of > the communication, including attachments. > > -----Original Message----- > From: Mestl, Robert R > Sent: Monday, January 04, 2010 2:24 PM > To: 'Daniel Atallah' > Cc: support@pidgin.im > Subject: RE: so slow > > I guess I should note that this latency seems to only be > after I first boot up my laptop... > > Right now it seems to start up fairly quickly after Quiting. > > I will see if I can troubleshoot the debug logging myself... > > Thx! > > > Robert Mestl > Software Analyst, West Interactive Corporation > 402-716-0492 | Cell 402-305-0702 | rrme...@west.com > > > This electronic message transmission, including any > attachments, contains information from West Corporation which > may be confidential or privileged. The information is > intended to be for the use of the individual or entity named > above. If you are not the intended recipient, be aware that > any disclosure, copying, distribution or use of the contents > of this information is prohibited. > > If you have received this electronic transmission in error, > please notify the sender immediately by a "reply to sender > only" message and destroy all electronic and hard copies of > the communication, including attachments. > > > -----Original Message----- > From: daniel.atal...@gmail.com > [mailto:daniel.atal...@gmail.com] On Behalf Of Daniel Atallah > Sent: Monday, January 04, 2010 2:14 PM > To: Mestl, Robert R > Cc: support@pidgin.im > Subject: Re: so slow > > On Mon, Jan 4, 2010 at 15:05, Mestl, Robert R > <rrme...@west.com> wrote: > > Attached is a screenshot of My Computer properties... > > > > > > > > > > > > I have no control over the SP updates, as it is a corporate > controlled > > computer... > > > > > > > > That 15-20 sec wait is killer! > > I'm not sure why this is a big deal; ideally you're not restarting > Pidgin all the time. > > At any rate, without a debug log, we can't guess why it is taking so > long to start; see http://d.pidgin.im/wiki/TipsForBugReports for how > to get a debug log. > > -D > > _______________________________________________ > Support@pidgin.im mailing list > Want to unsubscribe? Use this link: > http://pidgin.im/cgi-bin/mailman/listinfo/support > > > _______________________________________________ Support@pidgin.im mailing list Want to unsubscribe? Use this link: http://pidgin.im/cgi-bin/mailman/listinfo/support
