Hello All,
Here's the info drizzt said to me to post, the tail of the messages log
file of a
connection, the named.conf,resolv.conf,host.conf and host files from the
/etc directory.
To configure the connection I use YaST, I first create a network device ,
then do a
ppp config with those params:
ISP Generic , Country ALL
Debug on and the set default route.
Phone # 923319000 , PAP authentification
My username and my passwd
I put the nameservers 194.76.27.2 194.76.27.4
And nothing else.
I save the config and I made the device active.
To connect I run the scripts from /etc/suseppp/scripts without any
modifications.
Here are the files:
file:host.conf
order hosts bind
multi on
file:hosts
#
# hosts This file describes a number of hostname-to-address
# mappings for the TCP/IP subsystem. It is mostly
# used at boot time, when no name servers are running.
# On small systems, this file can be used instead of a
# "named" name server. Just add the names, addresses
# and any aliases to this file...
#
127.0.0.1 localhost
127.0.0.2 windrider windrider
file:named.conf
/* sample configuration file for BIND 8.1 or later
* should be installed as /etc/named.conf
*
* Author: Florian La Roche
*/
#
# overall options of the server
#
options {
directory "/var/named";
# the default is to fail, if the master file is not correct
check-names master warn;
pid-file "/var/named/slave/named.pid";
datasize default;
stacksize default;
coresize default;
files unlimited;
recursion yes;
multiple-cnames no; // if yes, then a name my have more
// than one CNAME RR. This use
// is non-standard and is not
// recommended, but it is available
// because previous releases supported
// it and it was used by large sites
// for load balancing.
forward only;
# list of DNS servers to ask
forwarders {
194.76.27.2;
194.76.27.41;
};
# the default is to listen on port 53 on all available interfaces
# you can also give a detailed list:
#listen-on { 5.6.7.8; };
#listen-on port 1234 { !1.2.3.4; 1.2/16; };
};
#
# do not be verbose about these problems...
#
#logging {
# category lame-servers { null; };
# category cname { null; };
#};
#
# predefined access control lists (acl):
# "any" allows all hosts
# "none" denies all hosts
# "localhost" allows the IP adresses of all interfaces of the system
# "localnets" allows any host on a network of the local interfaces
#
# defining an additional ACL:
#acl can_download { 192.168.0.17; 192.168.0.18; };
#
# The server statement defines the characteristics to be associated with
# a remote name server.
#
# Marking a server as bogus will prevent queries to that server.
#server 192.168.0.128 { bogus yes; }
# If the other name server has also BIND 8.1 or newer installed, you
# can allow compacter zone transfers with this statement.
#server 192.168.0.128 { transfer-format many-answers; }
zone "." IN {
type hint;
file "root.hint";
};
zone "localhost" IN {
type master;
file "localhost.zone";
check-names fail;
allow-update { none; };
};
zone "0.0.127.in-addr.arpa" IN {
type master;
file "127.0.0.zone";
check-names fail;
allow-update { none; };
};
file:resol.conf
#
# /etc/resolv.conf
#
# Automatically generated by SuSEconfig on Mon Jan 11 22:22:02 CET 1999.
#
# PLEASE DO NOT EDIT THIS FILE!
#
# Change variables (NAMESERVER + SEARCHLIST) in /etc/rc.config instead.
#
#
nameserver 194.76.27.2
nameserver 194.76.27.41
file:tail of messages log
Jan 12 15:49:48 windrider pppd[289]: rcvd [LCP EchoReq id=0x8e 04 fd 36 85]
Jan 12 15:49:48 windrider pppd[289]: sent [LCP EchoRep id=0x8e 39 56 31 2a]
Jan 12 15:49:48 windrider pppd[289]: sent [IPXCP ConfReq id=0x1 <network 0>
<node 0000e08cc70a> <router proto 2> <complete>]
Jan 12 15:49:51 windrider pppd[289]: sent [IPXCP ConfReq id=0x1 <network 0>
<node 0000e08cc70a> <router proto 2> <complete>]
Jan 12 15:49:52 windrider pppd[289]: rcvd [LCP EchoReq id=0xde 04 fd 36 85]
Jan 12 15:49:52 windrider pppd[289]: sent [LCP EchoRep id=0xde 39 56 31 2a]
Jan 12 15:49:54 windrider pppd[289]: sent [IPXCP ConfReq id=0x1 <network 0>
<node 0000e08cc70a> <router proto 2> <complete>]
Jan 12 15:49:56 windrider pppd[289]: rcvd [LCP EchoReq id=0x2e 04 fd 36 85]
Jan 12 15:49:56 windrider pppd[289]: sent [LCP EchoRep id=0x2e 39 56 31 2a]
Jan 12 15:49:57 windrider pppd[289]: sent [IPXCP ConfReq id=0x1 <network 0>
<node 0000e08cc70a> <router proto 2> <complete>]
Jan 12 15:50:00 windrider pppd[289]: rcvd [LCP EchoReq id=0x7e 04 fd 36 85]
Jan 12 15:50:00 windrider pppd[289]: sent [LCP EchoRep id=0x7e 39 56 31 2a]
Jan 12 15:50:00 windrider pppd[289]: sent [IPXCP ConfReq id=0x1 <network 0>
<node 0000e08cc70a> <router proto 2> <complete>]
Jan 12 15:50:03 windrider pppd[289]: sent [IPXCP ConfReq id=0x1 <network 0>
<node 0000e08cc70a> <router proto 2> <complete>]
Jan 12 15:50:04 windrider pppd[289]: rcvd [LCP EchoReq id=0xce 04 fd 36 85]
Jan 12 15:50:04 windrider pppd[289]: sent [LCP EchoRep id=0xce 39 56 31 2a]
Jan 12 15:50:06 windrider pppd[289]: IPXCP: timeout sending Config-Requests
Jan 12 15:50:07 windrider pppd[289]: rcvd [proto=0x31] 00 01 ff ff ff ff ff
ff 08 00 02 29 84 b3 08 00 45 00 02 40 8f 65 40 00 1e 11 cb 48 00 00 00 00
ff ff ff ff 00 44 00 43 02 2c d0 85 01 01 06 00 00 00 00 01 00 10 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 02 29 84 b3 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 63 82 53 63 3c 04 33
43 6f 6d ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00
Jan 12 15:50:07 windrider pppd[289]: Unknown protocol (0x31) received
Jan 12 15:50:07 windrider pppd[289]: sent [LCP ProtRej id=0x7 00 31 00 01 ff
ff ff ff ff ff 08 00 02 29 84 b3 08 00 45 00 02 40 8f 65 40 00 1e 11 cb 48
00 00 00 00 ff ff ff ff 00 44 00 43 02 2c d0 85 01 01 06 00 00 00 00 01 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 02
Jan 12 15:50:07 windrider pppd[289]: 29 84 b3 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 63 82 53
63 3c 04 33 43 6f 6d ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jan 12 15:50:07 windrider pppd[289]: 00 00 00 00 00 00 00]
Jan 12 15:50:08 windrider pppd[289]: rcvd [LCP EchoReq id=0x1e 04 fd 36 85]
Jan 12 15:50:08 windrider pppd[289]: sent [LCP EchoRep id=0x1e 39 56 31 2a]
Jan 12 15:50:12 windrider pppd[289]: rcvd [LCP EchoReq id=0x6e 04 fd 36 85]
Jan 12 15:50:12 windrider pppd[289]: sent [LCP EchoRep id=0x6e 39 56 31 2a]
Jan 12 15:50:16 windrider pppd[289]: rcvd [LCP EchoReq id=0xbe 04 fd 36 85]
Jan 12 15:50:16 windrider pppd[289]: sent [LCP EchoRep id=0xbe 39 56 31 2a]
Jan 12 15:50:20 windrider pppd[289]: rcvd [LCP EchoReq id=0xe 04 fd 36 85]
Jan 12 15:50:20 windrider pppd[289]: sent [LCP EchoRep id=0xe 39 56 31 2a]
Jan 12 15:50:24 windrider pppd[289]: rcvd [LCP EchoReq id=0x5e 04 fd 36 85]
Jan 12 15:50:24 windrider pppd[289]: sent [LCP EchoRep id=0x5e 39 56 31 2a]
Jan 12 15:50:28 windrider pppd[289]: rcvd [LCP EchoReq id=0xae 04 fd 36 85]
Jan 12 15:50:28 windrider pppd[289]: sent [LCP EchoRep id=0xae 39 56 31 2a]
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
