I've got a little input and question about this...
According to IOMEGA the ZIP+ might only work if it is the only device on
the SCSI controller (yea, tell me if that's not a pain). They sent me a
nice new manual and a letter explaning this a while back. That could be
you're problem.
Now, my question, is there anyone out there that HAS gotten a ZIP+ to
work with other devices on the SCSI controller? The whole reason I
bought the ZIP+ was so when I started updating my system I could go to
SCSI with alot of my devices, I even bought the ZIP Zoom SCSI adapter
just for the ZIP drive (so I have not had the chance to see if multiple
devices work). When IOMEGA sent me a nice big package in the mail
explaning it wouldn't work, I was less than ammused... but it only says
it MIGHT interefer with the autodetection of SCSI or Parellel Port
operation if you use it with other device.
What's everyone with a ZIP+'s experiance with this situation?
Thanks,
Tim.
"W.D.McKinney" wrote:
>
> I tried compiling support for ZIP+ external drive into my kernel 2.2.2
> with the following on bootup ?
>
<snip>
> What else should be configured for the ZIP+ to work ?
> Thanks so much.
>
> -Dee
>
> W.D.McKinney (Dee) [EMAIL PROTECTED]
> Faith is acting on your passions & beliefs.
>
> -
> To get out of this list, please send email to [EMAIL PROTECTED] with
> this text in its body: unsubscribe suse-linux-e
> Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
> archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
