Eric, Attached is an extract of my log file showing my configuration. Eric Lum wrote: > > Does anyone here have any experience with making this sound chip work under > SuSE Linux 6.0?; it's attached to the motherboard (Intel 440LX), so is not a > true isa sound card at all, so I don't know if working the soundconf module > does anything. The only information I have about it, I gained from reading > hardware device info, under Win98, as follows: > > Device: YAMAHA OPL3-SAx WDM Driver > Resources: > IRQ: 05 > I/O: 0220h - 022Fh > I/O: 0530h - 0537h > I/O: 0388h - 038Fh > I/O: 0330h - 0331h > I/O: 0370h - 0371h > DMA: 00 > DMA: 01 > > I tried as many combinations with the kernel as I could, using MSS/WSS, > Yamaha OPL3-SA1, 2, Soundblaster, whatever. No luck (I don't quite > understand what all the I/O references mean, what they refer to). I also > tried using the latest OSS package downloaded from their site, but I get an > 'incompatible kernel' error when I run it (I'm running 2.2.3). Any tips out > there? >
Card config: Yamaha OPL3-SA at 0x530 irq 10 drq 1,0 OPL3-SA (SB mode) at 0x220 irq 7 drq 3 OPL3-SA MIDI at 0x330 irq 9 OPL-2/OPL-3 FM at 0x388 Audio devices: 0: MSS audio codec (CS4231) (DUPLEX) 1: Shadow of audio device #0 (DUPLEX) 2: OPL3-SA SB (3.1) Synth devices: 0: Yamaha OPL-3 Midi devices: 0: Sound Blaster 1: OPL3-SA (MPU401) Timers: 0: System clock 1: MSS audio codec (CS4231) Mixers: 0: MSS audio codec (CS4231) 1: Sound Blaster
