> "(Ted Harding)" wrote:
>
> > I wonder if anyone who has succeeded with a similar setup can give me
> > any useful tips.
> >
> > I'm trying to get a PnP "Soundblaster" working on SuSE-5.1.
> >
> > "isapnp" gives the result:
> >
> > Board 1 has Identity 27 ff ff ff ff 68 18 73 16: ESS1868 Serial No
> > 4294967295
> >
> > I'm trying to follow the guidance in the various Sound howtos, but can
> > get no further: whatever I try, "cat /dev/sndstat" always tells me no
> > "audio" devices are available, so presumably it's getting no response
> > from the card.
> >
> > The various /dev sound devices seem to be in place as they should be.
> >
> > Any ideas, anyone?
> >
You also have to edit your /etc/isapnp.conf file to tell
isapnp which irq's and io addresses to use. Basically just
edit the isapnp.conf file, and uncomment out the # in front
of the irqs you want.
Just because Board1 was identified at boot time, it didn't
get initialized with the right irq's and io's.
A second entry later in the boot process will tell you the board
has been initialized.
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
