Well, you asked for -vvn. Relevant part is:
01:00.0 0300: 1002:5653 Subsystem: 103c:309e Fabio On 11/3/06, Fabio Comolli <[EMAIL PROTECTED]> wrote: > I already tried but vga=0 is simply ignored at boot. > > I should have added that to enable framebuffer for my card I use this patch: > http://www.shaftnet.org/users/pizza/radeonfb-atom-2.6.18-v6a.diff > > found in BZ # 6215 . > > lspci -vv follows. > > Regards (and thanks for looking at this). > Fabio > > > > 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon > Mobility X700 (PCIE) (prog-if 00 [VGA]) > Subsystem: Hewlett-Packard Company Unknown device 309e > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at 3000 [size=256] > Region 2: Memory at c8100000 (32-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at c8120000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express Endpoint IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ > Device: Latency L0s <256ns, L1 <4us > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 > Link: Latency L0s <256ns, L1 <2us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > Capabilities: [80] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [100] Advanced Error Reporting > > > > > > > > > > On 11/3/06, Carl-Daniel Hailfinger <[EMAIL PROTECTED]> wrote: > > Fabio Comolli wrote: > > > s2ram works perfectly both in console mode than in X with -f -s -p > > > options, but _only_ if framebuffer (vesa or radeonfb) is disabled in > > > kernel config. > > > > Can you try if vga=0 boot parameter is enough? And please post > > "lspci -vvn" so I can add suspend support to radeonfb for your card. > > > > Regards, > > Carl-Daniel > > -- > > http://www.hailfinger.org/ > > > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Suspend-devel mailing list Suspend-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/suspend-devel