I'm only interested in using a mix in the Petromax to heat BD. I heat my house with wood anyway. I don't plan to mix gasoline with BD or HHO and use it inside - besides my furnace is gas, not that I run it if I can help it.
I would like to take apart a Beckett or Riello or similar to see how it works. I'm familiar with altfurnace. You have to be very careful what you say or it really sets them off. David Miller wrote: >Mike Weaver wrote: > > > >>I've done some initial research but haven't delved into one. Sooner or >>later I'll find an oil furnace someone is throwing away and see what I >>can do. >>If I had to cut the BD with another agent to make it easier to use I >>would do that. Does anyone have any suggestions? Gasoline? >>I have 55 gallons of 99% Isopropyl alcohol - is that suitable? >> >> >> >> > >I'm not clear on whether you want to cut the BD for use in a backpacking >stove for heating your reactor or in a modified furnace. There's a big >differnce. With the camp stove you have a fairly open system, and one >where the fuel is supposed to vaporize. Cutting with something fairly >volatile will probably thin out the BD and make ignition much easier. >Gasoline should work, as would mineral spirits, acetone, alcohol, etc. > >You really really don't want to mix volatiles into a closed system like >a boiler or furnace. It's common when having problems with them for >some fuel to puddle in the burner; something like gasoline could easily >result in an explosive condition. > >That's my take on it at least. Check out the altfuelfurnace list at >yahoo if you want more info, but know that they won't entertain any >discussion of cutting with volatile liquids there at all. > >--- David > > > >>-Mike >> >>Zeke Yewdall wrote: >> >> >> >> >> >>>What about the type of burners that are designed to use a liquid fuel >>>directly rather than volatilize a liquid fuel? Like fuel oil >>>furnaces, and waste engine oil burners. All of these I have seen are >>>in the 100,000 Btu/hr range though -- if you could find one more like >>>10 or 20 kBtu, it might work well for heating the reactor. >>> >>>http://www.espar.com/ something like this may be able to be modified. >>>Not cheap though. >>> >>> >>>On 12/6/06, Joe Street <[EMAIL PROTECTED]> wrote: >>> >>> >>> >>> > >[snip] > >_______________________________________________ >Biofuel mailing list >Biofuel@sustainablelists.org >http://sustainablelists.org/mailman/listinfo/biofuel_sustainablelists.org > >Biofuel at Journey to Forever: >http://journeytoforever.org/biofuel.html > >Search the combined Biofuel and Biofuels-biz list archives (50,000 messages): >http://www.mail-archive.com/biofuel@sustainablelists.org/ > > _______________________________________________ Biofuel mailing list Biofuel@sustainablelists.org http://sustainablelists.org/mailman/listinfo/biofuel_sustainablelists.org Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Search the combined Biofuel and Biofuels-biz list archives (50,000 messages): http://www.mail-archive.com/biofuel@sustainablelists.org/