Ok, I got It, thank you for helping.
30 августа 2021, 11:28:41, от "Paul Wouters" <[email protected]>: On Fri, 27 Aug 2021, Валентин Росавицкий wrote: > Is It possible to assign static ip for users when using psk+xauth? > If static ip possibe from client (right) side will be fine too. > > > I use default config like: > conn xauth-psk > auto=add > leftsubnet=0.0.0.0/0 > rightaddresspool=10.3.0.50-10.3.0.250 > modecfgdns="8.8.8.8 8.8.4.4" > leftxauthserver=yes > rightxauthclient=yes > leftmodecfgserver=yes > rightmodecfgclient=yes > modecfgpull=yes > xauthby=file > fragmentation=yes > cisco-unity=yes > also=shared xauthby When IKEv1 XAUTH support is available, set the method used by XAUTH to authenticate the user with IKEv1. The currently supported values are file (the default), pam or alwaysok. The password file is located at /etc/ipsec.d/passwd, and follows a syntax similar to the Apache htpasswd file, except an additional connection name argument (and optional static IP address) are also present: username:password:conname:ipaddress So you can add "special" users with static IP by adding: myname:mypass:xauth-psk:10.3.0.49 Be careful not to assign static IP's from the addresspool= defined, or you will get clashes. Paul
_______________________________________________ Swan mailing list [email protected] https://lists.libreswan.org/mailman/listinfo/swan
