Hi Stuart The rendered layering of platforms just doesn't happen. Caused me a lot of grief with Birmingham New Street - so I switched to using levels and using Adrien Pavie's OpenLevelUp which allows you to zoom up and down through building floors. Here's what New St looks like <http://github.pavie.info/openlevelup/?lat=52.477819&lon=-1.900522&z=18&t=0&lvl=0&tcd=1&urd=0&bdg=0&pic=0&nte=0&ilv=0>. Slider is on the top left of the screen
Regards Brian On 21 January 2016 at 10:12, Stuart Reynolds < stu...@travelinesoutheast.org.uk> wrote: > Hi, > > I made a number of adjustments around the transport terminus at Gatwick > Airport South Terminal yesterday. When this was first mapped, what is > actually three buildings (the railway station, the covered travelators from > the bus station & car parks, and the southern stairs from the railway > platforms) were all mapped as one building, and the platforms were > “inserts” into the gaps rather than being the continuous entities that they > are. So I have separated those all out, and made the platforms a continuous > block. I also added internal escalators and travelators, although that is > immaterial to the question that I’m about to ask. > > The buildings are all mapped as layer=1, and the platforms without any > layer tag (which should default them to layer=0, AFAIK). So why are the > platforms and rail tracks (which I haven’t touched) been rendered over the > buildings, rather than under them? > > See http://www.openstreetmap.org/#map=18/51.15634/-0.16124 > > Thanks > Stuart > > > ------------------------------------ > Stuart Reynolds > for traveline south east & anglia > > > > > _______________________________________________ > Talk-GB mailing list > Talk-GB@openstreetmap.org > https://lists.openstreetmap.org/listinfo/talk-gb > >
_______________________________________________ Talk-GB mailing list Talk-GB@openstreetmap.org https://lists.openstreetmap.org/listinfo/talk-gb