I'm wondering what the best way would be to tag a good-quality shoulder
that acts essentially as an undesignated bike lane, in that you can use
it but it is not required. Current Florida DOT policy is to use these on
rural roads, with marked bike lanes only when there is a lane to the
right. For example here:
http://maps.google.com/maps?hl=en&ll=30.605358,-86.950672&spn=0.008255,0.016512&gl=us&t=m&z=17&layer=c&cbll=30.605241,-86.950558&panoid=X4-X3CdhvVO_ptMWbvB8SA&cbp=12,330.83,,0,9.24
One can choose to ride either in the right lane or on the shoulder
beyond the intersection.
One regional mapper uses cycleway=shoulder for this, but I see that as
sub-optimal, since it's primarily a shoulder, not a cycleway. It would
be like putting cycleway=sidewalk whenever there's a smooth paved sidewalk.
On the other hand, shoulder=yes or shoulder=paved says nothing about the
quality of the shoulder. Should there be a minimum width for a shoulder
(FDOT's standard is 4 feet)?
_______________________________________________
Talk-us mailing list
Talk-us@openstreetmap.org
http://lists.openstreetmap.org/listinfo/talk-us