Hi Karen,
Would that number go up, say to USB1 to simulate com 1?
Kind of. Not quite.
Default situation: The first USB serial device you plug in (it doesn't
matter which port) appears as /dev/ttyUSB0. The next one becomes
/dev/ttyUSB1
There's no way of telling which device is what without digging about in
udev rules or making sure you use distinct hardware for each one (like
the FTDI, Prolific, QinHeng and Silicon Labs devices I mentioned the
other day).
Allocation of COM ports under Windows seems to be random. The first
device I plug in is usually COM6 or COM9. No idea about DOS.
For example
there are dectalk USB devices, however for the software to find the
item a port would need to be associated in Linux or likely in a virtual
setting as well.
I have a USB DecTalk; well, an EMIC-2 board with an FTDI USB-Serial
adapter I homebrewed into a small box with a speaker and headphone jack:
https://scruss.com/blog/2016/02/27/t%c9%92k-b%c9%92ks-a-tiny-hardware-speech-synthesizertts/
. FTDI serial interfaces - although briefly vilified by Linux types -
are the easiest to work with under Linux. Each one has a unique serial
number, and can be made to appear on a particular port with a little bit
of configuration.
cheers,
Stewart
---
Post to this mailing list talk@gtalug.org
Unsubscribe from this mailing list https://gtalug.org/mailman/listinfo/talk
