dodik n. wrote: > Kalau cara setting paket ethernet trunk 802.1q di linux biar ada > precedence nya dengan software apa ya ? saya cari2 di google, ketemu
Nama paketnya vlan, perlu modul kernel 8021q (Di debian kalo ndak salah saya pakai sejak sarge atau woody (lupa persisnya), defaultnya udah ada, tinggal pakai). http://www.candelatech.com/~greear/vlan.html # vconfig Expecting argc to be 3-5, inclusive. Was: 1 Usage: add [interface-name] [vlan_id] rem [vlan-name] set_flag [interface-name] [flag-num] [0 | 1] set_egress_map [vlan-name] [skb_priority] [vlan_qos] set_ingress_map [vlan-name] [skb_priority] [vlan_qos] set_name_type [name-type] * The [interface-name] is the name of the ethernet card that hosts the VLAN you are talking about. * The vlan_id is the identifier (0-4095) of the VLAN you are operating on. * skb_priority is the priority in the socket buffer (sk_buff). * vlan_qos is the 3 bit priority in the VLAN header * name-type: VLAN_PLUS_VID (vlan0005), VLAN_PLUS_VID_NO_PAD (vlan5), DEV_PLUS_VID (eth0.0005), DEV_PLUS_VID_NO_PAD (eth0.5) * FLAGS: 1 REORDER_HDR When this is set, the VLAN device will move the ethernet header around to make it look exactly like a real ethernet device. This may help programs such as DHCPd which read the raw ethernet packet and make assumptions about the location of bytes. If you don't need it, don't turn it on, because there will be at least a small performance degradation. Default is OFF. -- KM -- FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab Unsubscribe: kirim email ke tanya-jawab-unsubscr...@linux.or.id Arsip dan info milis selengkapnya di http://linux.or.id/milis
