Some drivers definitely change the format of the radiotap packets on the fly in the same stream. As Guy says, you need to look at the bit field in the header and parse the complex header. If all you care about is the dot11 header you can just skip the header using the length field.
Also beware of the padding requirements in the radiotap headers or it will come and bite you. Guy Harris <g...@alum.mit.edu> wrote: > >On Apr 28, 2013, at 8:54 AM, Luís Correia <lfpcorr...@gmail.com> wrote: > >> Indeed I've seen a radiotap_iterator function in radiotap headers. >But the function "logic" was a little heavy for a 400mhz MIPS CPU. No? > >Maybe *that* iteration logic is heavy, but some iteration logic is a >*requirement*, unless: > > you know what the driver is adding as a radiotap header, and can make >sure you know when the driver changes what it adds; > > the driver *always* puts out the *exact* same set of fields on *every* >packet; > > if the driver injects *transmitted* packets into the capture path, >then either "*every* packet" includes *transmitted* packets (so that >the received signal strength field is put into the transmitted >packets!) or you can distinguish between received and transmitted >packets and will not look at the radiotap header on transmitted >packets. > >Note, by the way, that if the radiotap header length is not the same on >all received packets, the header is not putting out the exact same set >of fields on every packet. > >If you cannot be 100% certain of all of those, you *CANNOT* assume that >a given field will be at the same location in the header for all >packets. > >> From what I have read the parse packet function should be as fast as >possible.. what's your opinion on that? > >"As possible" is the key here. To quote a line attributed to Albert >Einstein, "Everything should be made as simple as possible, but no >simpler." "Simpler than possible" might include "no iterator" here. > >> Do you think I should copy each packet for latter processing or do I >have "room" for in-flight processing? > >Iteration has nothing to do with copying packets. You don't need to >copy the packet to use the presence bits as intended. > >> Can't I just bit test the it_present field for one of the two rssi >readings and access the struct field? > >Not unless you can achieve *all* of the conditions in my list above. >_______________________________________________ >tcpdump-workers mailing list >tcpdump-workers@lists.tcpdump.org >https://lists.sandelman.ca/mailman/listinfo/tcpdump-workers -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. _______________________________________________ tcpdump-workers mailing list tcpdump-workers@lists.tcpdump.org https://lists.sandelman.ca/mailman/listinfo/tcpdump-workers
