Jeez if they still get screwed by code red...fire their admins and give me a job ! Anywayz i changed the cards setting to promiscious (was set to no), rebooted and voila it still doesn't work ;-). Ag maybe they just say it's supported but it isn't actually.
> -----Original Message----- > From: Guy Harris <[EMAIL PROTECTED]>@SANLAM > Sent: 12/12/2001 11:23 AM > To: Smit, Willem (SEB IS Maintenance) > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: Re: [tcpdump-workers] WinDump > > On Wed, Dec 12, 2001 at 11:05:06AM +0200, Smit, Willem (SEB IS > Maintenance) wrote: > > Found the problem -> it was the promiscious switch on pcap_open_live... > if > > it's not 0 it doesn't work. > > I think at least some token ring interfaces don't support promiscuous > mode - and I seem to remember hearing that about some Madge token ring > adapters. > > Unfortunately, if you follow the "Search the knowledgebase" link on > Madge's on-line knowledge base site: > > http://kbase.madge.com/ > > you go to the page > > http://kbase.madge.com/cssearch.htm > > which says, err, umm > > Welcome to http://www.worm.com ! > > Hacked By Chinese! > > Alert, alert, Code Red, Code Red.... > > However, the page at > > http://www.wildpackets.com/support/hardware/tokenpeek > > says that for the Madge "Smart 16/4 PCMCIA Ringnode Mk2 (20-01)" > > For promiscious[sic] capture, must enable "promiscious[sic] mode > support" (or "Statistics Gathering mode") in the adapter > properties and reboot. > > and says similar thinks for other Madge adapters. - This is the TCPDUMP workers list. It is archived at http://www.tcpdump.org/lists/workers/index.html To unsubscribe use mailto:[EMAIL PROTECTED]?body=unsubscribe
