The mpt driver prints the following: mpt0 at pci3 dev 1 function 0: Symbios Logic 53c1020/53c1030 ioapic1: int4 1a9a8<vector=a8,delmode=1,logical,actlo,level,masked,dest=0> f000000<target=f> mpt0: interrupting at ioapic1 pin 4, event channel 3 scsibus0 at mpt0: 16 targets, 8 luns per target
The Raid-Set appears as: sd0 at scsibus0 target 0 lun 0: <LSILOGIC, 1030 IM IM, 1000> disk fixed sd0: fabricating a geometry sd0: 69994 MB, 69994 cyl, 64 head, 32 sec, 512 bytes/sect x 143347995 sectors sd0: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queueing Is tagged queueing set individually for each (virtual) disk or for a SCSI or RAID controller? As for the mpt driver, I think i will build a custom kernel containing some diagnostic lines.