From: "D'Arcy J.M. Cain" <[email protected]> Subject: HP Proliant won't reboot Date: Tue, 1 Apr 2014 10:03:58 -0400
> I am having a strange error. I just picked up a HP Proliant G5 and > installed NetBSD 6.1.3 AMD64 on it. Everything is fine as far as > installing and running goes but when I reboot it goes through most of > the stuff, detaches a bunch of devices and then says "rebooting" and > stops. NumLock doesn't change the light and the system won't respond > to the keyboard or the network. Luckily it has already unmounted the > drive so I can safely power cycle but that's going to be extremely > inconvenient in a lights out situation. Try to cold boot. if it works,try to update iLO firmware if you can. 1. plug off power cable from power supply. 2. wait 3 min and pray. 3. plug in power cable and boot. -- Jun Ebihara
