Tom Ivar Helbekkmo <t...@hamartun.priv.no> writes: > The uhci pins on the ioapics are chalking up a few interrupts, but not > many, and no bursts.
Still nothing bad happening, but I did reboot just now, and saw something that I've observered a few times lately: when the machine was just sufficiently up that I could log in, 'vmstat -i' told me that the ioapic pin for uhci2 had already generated slightly more than 210000 interrupts. The USB port was working nicely, though, and still is, and I didn't notice any hang during the boot. That doesn't mean it wasn't there, of course; the boot process has many little stops and starts, and the serial dongle on the uhci2 port came on-line, as usual, just when my /etc/ifconfig.wm0 was sleeping, waiting for the port to auto-negotiate. Everything looks nice now -- interrupts slowly ticking in on the uhci ioapic pins, but nothing ugly. Have started a distribution build, and we'll see how that behaves. :) Oh, and I'm still running in single CPU mode. Will go SMP tomorrow, if everything still looks good by then. -tih -- Popularity is the hallmark of mediocrity. --Niles Crane, "Frasier"