hello. Below is the output of edid-decode against the data I extracted using your wsedid program. While I don't remember the exact numbers for this monitor, they look reasonable and, there is a dotclock value in there. The only thing that looks odd is that it says the monitor is attached to the displayport, which is incorrect. It's attached to the 15-pin VGA port. Perhaps that's normal, I'm not familiar with this graphics adapter. Anyway, what do you think? And, yes, this monitor was really made in the year 2000. -thanks -Brian
edid-decode (hex): 00 ff ff ff ff ff ff 00 4d d9 90 03 d1 24 7b 00 2a 0a 01 04 a5 25 1b 96 e3 0c c9 a0 57 47 9b 27 12 48 4c ff ff 80 c2 80 a9 4f 81 59 81 4f 71 59 61 59 45 59 31 59 86 3d 00 c0 51 00 30 40 40 a0 13 00 60 08 11 00 00 1e 00 00 00 fd 00 30 78 1e 60 1e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 4f 4e 59 20 43 50 44 2d 45 34 30 30 00 00 00 ff 00 38 30 37 30 33 35 33 0a 20 20 20 20 20 00 8f ---------------- Block 0, Base EDID: EDID Structure Version & Revision: 1.4 Vendor & Product Identification: Manufacturer: SNY Model: 912 Serial Number: 8070353 Made in: week 42 of 2000 Basic Display Parameters & Features: Digital display Bits per primary color channel: 8 DisplayPort interface Maximum image size: 37 cm x 27 cm Gamma: 2.50 DPMS levels: Standby Suspend Off Supported color formats: RGB 4:4:4 First detailed timing includes the native pixel format and preferred refresh rate Display is continuous frequency Color Characteristics: Red : 0.6250, 0.3398 Green: 0.2802, 0.6054 Blue : 0.1552, 0.0703 White: 0.2832, 0.2978 Established Timings I & II: IBM : 720x400 70.082 Hz 9:5 31.467 kHz 28.320 MHz IBM : 720x400 87.850 Hz 9:5 39.444 kHz 35.500 MHz DMT 0x04: 640x480 59.940 Hz 4:3 31.469 kHz 25.175 MHz Apple : 640x480 66.667 Hz 4:3 35.000 kHz 30.240 MHz DMT 0x05: 640x480 72.809 Hz 4:3 37.861 kHz 31.500 MHz DMT 0x06: 640x480 75.000 Hz 4:3 37.500 kHz 31.500 MHz DMT 0x08: 800x600 56.250 Hz 4:3 35.156 kHz 36.000 MHz DMT 0x09: 800x600 60.317 Hz 4:3 37.879 kHz 40.000 MHz DMT 0x0a: 800x600 72.188 Hz 4:3 48.077 kHz 50.000 MHz DMT 0x0b: 800x600 75.000 Hz 4:3 46.875 kHz 49.500 MHz Apple : 832x624 74.551 Hz 4:3 49.726 kHz 57.284 MHz DMT 0x0f: 1024x768i 86.958 Hz 4:3 35.522 kHz 44.900 MHz DMT 0x10: 1024x768 60.004 Hz 4:3 48.363 kHz 65.000 MHz DMT 0x11: 1024x768 70.069 Hz 4:3 56.476 kHz 75.000 MHz DMT 0x12: 1024x768 75.029 Hz 4:3 60.023 kHz 78.750 MHz DMT 0x24: 1280x1024 75.025 Hz 5:4 79.976 kHz 135.000 MHz Apple : 1152x870 75.062 Hz 192:145 68.681 kHz 100.000 MHz Standard Timings: CVT : 1800x1440 59.911 Hz 5:4 89.447 kHz 218.250 MHz (EDID 1.4 source) GTF : 1800x1440 60.000 Hz 5:4 89.400 kHz 219.566 MHz (EDID 1.3 source) DMT 0x36: 1600x1200 75.000 Hz 4:3 93.750 kHz 202.500 MHz DMT 0x21: 1280x960 85.002 Hz 4:3 85.938 kHz 148.500 MHz CVT : 1280x960 74.857 Hz 4:3 75.231 kHz 130.000 MHz (EDID 1.4 source) GTF : 1280x960 75.000 Hz 4:3 75.150 kHz 129.859 MHz (EDID 1.3 source) CVT : 1152x864 84.790 Hz 4:3 77.159 kHz 119.750 MHz (EDID 1.4 source) GTF : 1152x864 85.000 Hz 4:3 77.095 kHz 119.651 MHz (EDID 1.3 source) DMT 0x13: 1024x768 84.997 Hz 4:3 68.677 kHz 94.500 MHz DMT 0x0c: 800x600 85.061 Hz 4:3 53.674 kHz 56.250 MHz DMT 0x07: 640x480 85.008 Hz 4:3 43.269 kHz 36.000 MHz Detailed Timing Descriptors: DTD 1: 1280x1024 85.024 Hz 5:4 91.146 kHz 157.500 MHz (352 mm x 264 mm) Hfront 64 Hsync 160 Hback 224 Hpol P Vfront 1 Vsync 3 Vback 44 Vpol P Display Range Limits: Monitor ranges (GTF): 48-120 Hz V, 30-96 kHz H, max dotclock 300 MHz Display Product Name: 'SONY CPD-E400' Display Product Serial Number: '8070353' Checksum: 0x8f