On Mon, Feb 17, 2025 at 06:12:34PM +0100, Edgar Fuß wrote: > After updating two identical servers from -8 to -10, I regularily get > > autoconfiguration error: svwsata0:2:0: lost interrupt > type: ata tc_bcount: 8192 tc_skip: 0 > autoconfiguration error: svwsata0:2:0: bus-master DMA error: missing > interrupt, status=0x20 > wd2a: DMA error writing fsbn 921744 of 921744-921759 (wd2 bn 921807; cn 914 > tn 7 sn 54), xfer 38, retry 0 > wd2: soft error (corrected) xfer 38 > > on both of them (for varying values of device, fsbn etc) on both discs. > I didn't get them under -8. > > The only relevant dmesg diff I can find wrt. an identical server still > running -8 (though some of the discs are not 100% identical since some of > them > failed and were replaced) are > > -wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) > +wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), > NCQ (32 tags) w/PRIO > > and > > -wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) > -wd1(svwsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) > +wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), > WRITE DMA FUA, NCQ (32 tags) > +wd1(svwsata0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using > DMA), WRITE DMA FUA EXT > > Any hints?
Could you give https://mail-index.netbsd.org/source-changes/2025/02/17/msg155557.html or -r1.171 src/sys/dev/ata/ata.c -r1.33 src/sys/dev/ata/files.ata a try?
