Hmm
any chance you can get into ddb from that and get me a traceback tobias?
Potentially there is a vnode sitting on something in the stack there
that I would be very interested
in a show vnode from ddb on. I will also see if I can do anything
here to see that as well..
2010/1/10 Tobias Ulmer <tobi...@tmux.org>:
> On Sat, Jan 09, 2010 at 04:05:13AM -0700, Bob Beck wrote:
>> Try this.
>
> Box locked up under "make clean" while building ports, hdd led still on.
> Last time i've checked it had about 84000 vnodes, which gave a very
> nice (subjective) speedup since no read access gets to the disk,
> (almost) ever.
>
>
> savecore: reboot after panic: pool_do_get(inodedeppl): free list
> modified: page 0xddeb9000; item addr 0xddeb9dcc; offset 0x28=0xddfbaabb
> savecore: system went down at Sun Jan 10 11:06:09 2010
> savecore: no dump, not enough free space on device
>
> OpenBSD 4.6-current (GENERIC) #0: Sat Jan 9 15:02:25 CET 2010
>
tobi...@nostromo.tmux.org:/home/tobiasu/work/openbsd/src/sys/arch/i386/compi
le/GENERIC
> cpu0: AMD Athlon(tm) XP 2500+ ("AuthenticAMD" 686-class, 512KB L2 cache)
1.84 GHz
> cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
> real mem = 1610117120 (1535MB)
> avail mem = 1551421440 (1479MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 05/17/05, BIOS32 rev. 0 @ 0xfa390,
SMBIOS rev. 2.3 @ 0xf0100 (38 entries)
> bios0: vendor Award Software International, Inc. version "F6" date
05/17/2005
> bios0: Gigabyte Technology Co., Ltd. GA-7S748
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc784
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc6f0/144 (7 entries)
> pcibios0: PCI Exclusive IRQs: 5 6 9 10 11
> pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xc000 0xcc000/0x8000!
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "SiS 746 PCI" rev 0x10
> sisagp0 at pchb0
> agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000
> ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon VE" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> radeondrm0 at vga1: irq 10
> drm0 at radeondrm0
> pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
> pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 746: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP1604N>
> wd0: 16-sector PIO, LBA48, 152626MB, 312579695 sectors
> wd1 at pciide0 channel 0 drive 1: <WDC WD1200BB-00DWA0>
> wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
> wd2 at pciide0 channel 1 drive 0: <ST3250620A>
> wd2: 16-sector PIO, LBA48, 238474MB, 488395055 sectors
> wd3 at pciide0 channel 1 drive 1: <ST3250620A>
> wd3: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
> wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> wd3(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
> ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 10, version
1.0, legacy support
> ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11, version
1.0, legacy support
> ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 6
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
> ral0 at pci0 dev 10 function 0 "Ralink RT2561" rev 0x00: irq 5, address
00:80:5a:38:c4:0b
> ral0: MAC/BBP RT2661B, RF RT2527
> rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:08:54:01:0a:00
> rlphy0 at rl0 phy 0: RTL internal PHY
> rl1 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:05:5d:2b:fa:b4
> rlphy1 at rl1 phy 0: RTL internal PHY
> cmpci0 at pci0 dev 13 function 0 "C-Media Electronics CMI8738/C3DX Audio"
rev 0x10: irq 9
> audio0 at cmpci0
> opl0 at cmpci0: model OPL3
> midi0 at opl0: <CMPCI Yamaha OPL3>
> mpu at cmpci0 not configured
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pcppi0 at isa0 port 0x61
> midi1 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> it0 at isa0 port 0x2e/2: IT8705F rev 2, EC port 0x290
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> biomask fd47 netmask fd67 ttymask fdff
> mtrr: Pentium Pro MTRR support
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
