On Tue, Aug 31, 2010 at 10:58:08AM +0300, Oleksii Zhmyrov wrote:
> Hi,
>
> I use OpenBSD -current on my desktop with Xfce4.
> With Option "UseSIGIO" "false" xserver refuses to start at all.
>
Same here, segmentation fault. I am on a radeon card too, x1950 with
a ca. 1 week old x11.
snipplet from Xorg.0.log:
...
[3357823.938] (**) Keyboard0: CustomKeycodes disabled
[3357823.938] (II) XINPUT: Adding extended input device "Keyboard0" (type:
KEYBOARD)
[3357823.938] Segmentation fault at address 0x9b641ce
[3357823.938]
Fatal server error:
[3357823.938] Caught signal 11 (Segmentation fault). Server aborting
[3357823.938]
[3357823.938]
...
I can attach the rest if it is needed.
Alf
OpenBSD 4.8 (GENERIC.MP) #359: Mon Aug 16 09:16:26 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz ("GenuineIntel" 686-class)
3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
real mem = 2145873920 (2046MB)
avail mem = 2100781056 (2003MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/11/07, BIOS32 rev. 0 @ 0xfb2e0, SMBIOS
rev. 2.4 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F1" date 12/11/2007
bios0: Gigabyte Technology Co., Ltd. EP35-DS3P
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC SSDT SSDT
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
HUB0(S5) UAR1(S1) USB0(S1) USB1(S1) USB2(S1) USB3(S1) US31(S1) USB4(S1)
USB5(S1) USBE(S1) USE2(S1) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 333MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz ("GenuineIntel" 686-class)
3.01 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus 3 (PEX4)
acpiprt6 at acpi0: bus 4 (PEX5)
acpiprt7 at acpi0: bus 5 (HUB0)
acpicpu0 at acpi0: FVS, 3000, 2000 MHz
acpicpu1 at acpi0: FVS, 3000, 2000 MHz
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 2 int 16 (irq
10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X1950 Pro" rev 0x9a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at radeondrm0
"ATI Radeon X1950 Pro Sec" rev 0x9a at pci1 dev 0 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 16 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21 (irq
12)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq
10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq
10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 2 int
22 (irq 9)
azalia0: codecs: Realtek ALC885
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int 16 (irq
10)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 2 int 16 (irq
10)
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16 (irq 10), AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 16 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <ASUS, DVD-E616A3, 1.01> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq
12)
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic
2 int 17 (irq 12), address 00:1a:4d:5f:84:be
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq
11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19 (irq
11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq
10)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq
11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 5
emu0 at pci5 dev 0 function 0 "Creative Labs SoundBlaster Live" rev 0x08: apic
2 int 20 (irq 3)
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio1 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x08 at pci5 dev 0 function 1 not
configured
unknown vendor 0x4444 product 0x0016 (class multimedia subclass video, rev
0x01) at pci5 dev 1 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 0) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD502IJ>
wd0: 16-sector PIO, LBA48, 476938MB, 976771055 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <ST3160815AS>
wd1: 16-sector PIO, LBA48, 152626MB, 312579695 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18
(irq 10)
iic0 at ichiic0
iic0: addr 0x4e 02=3a 03=3e 04=3e 12=ff 13=0f 26=03 28=83 29=12 2a=12 2b=28
words 00=0000 01=003a 02=3a3e 03=3e3e 04=3e00 05=0000 06=0000 07=0000
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 (irq 11) for native-PCI interrupt
atapiscsi1 at pciide2 channel 1 drive 0
scsibus2 at atapiscsi1: 2 targets
cd1 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GH22NS50, TN01> ATAPI 5/cdrom
removable
cd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 4, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhub8 at uhub5 port 1 "Genesys Logic GL650 Hub" rev 1.10/3.04 addr 2
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Gaming Mouse"
rev 2.00/49.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Gaming Mouse"
rev 2.00/49.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid1 at uhidev1 reportid 17: input=19, output=19, feature=0
uhidev2 at uhub8 port 4 configuration 1 interface 0 "Razer Razer Tarantula
Keyboard" rev 1.10/21.00 addr 3
uhidev2: iclass 3/1
ukbd0 at uhidev2: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev3 at uhub8 port 4 configuration 1 interface 1 "Razer Razer Tarantula
Keyboard" rev 1.10/21.00 addr 3
uhidev3: iclass 3/0, 2 report ids
uhid2 at uhidev3 reportid 1: input=2, output=0, feature=0
uhid3 at uhidev3 reportid 2: input=1, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Looks more ugly then it is because I used 2 but have now only 1 monitor.
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0"
InputDevice "Mouse0"
EndSection
#Section "ServerFlags"
# Option "UseSIGIO" "false"
#EndSection
Section "Files"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Modes"
Identifier "1680x1050_120"
Modeline "1680x1050_120" 238.46 1680 1728 1760 1840 1050 1053 1059 1080
+hsync +vsync
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "Position" "1680 0"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "ModeValidation" "AllowNon60HzDFPModes"
Option "Position" "0 0"
UseModes "1680x1050_120"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
# Option "FlatPanel" "true" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
# Option "DualHead" "true" # [<bool>]
Option "EnablePageFlip" "true"
# Option "AccelMethod" "XAA"
Option "monitor-DVI-0" "Monitor0"
Option "monitor-DVI-1" "Monitor1"
Identifier "Card0"
Driver "radeon"
VendorName "ATI"
BoardName "X1950"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050_120"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card0"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Virtual 3360 1050
Viewport 0 0
Depth 24
Modes "1680x1050_120" "1680x1050"
EndSubSection
EndSection
