On Sat, Aug 24, 2013 at 10:08 AM, Brynet wrote:
This is likely a problem with the BIOS on the system, the memory map
has
duplicate entries..
You can attempt to manually fix this at boot> using a variation of the
same command used to retreive the mappings:
boot> mach mem =1023M
You can play around with it, maybe try removing both of the duplicates
first:
boot> mach mem -0x3ff00000@0x100000
boot> mach mem -0x3ff00000@0x100000
-Bryan.
Bryan, removing both gives this
warning: too little memory available;running in degraded mode
press a key to confirm
[ using 749064 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 867 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,PSN,MMX,FXSR,SSE
real mem = 585728 (0MB)
avail mem = 790528 (0MB)
panic: procinit: malloc
Stopped at Debugger+0x4: popl %ebp
Debugger(d08fdcbc,d0bc9f04,d08d9e90,d0bc9f04,bc8000) at Debugger+0x4
panic(d08d9e90,29,2,d0a548c8,0) at panic+0x5d
procinit(d08d6b00,d08d8f40,c0,d0bc9f4c,1) at procinit+0x29c
main(d02004f6,d02004fe,0,0,0) at main+0x75
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS
PANIC!
Removing only one, I get this. As you can see, all the NICs have FF and
00 as the MAC address. So, it's a bit farther, but still not quite
there...
Stan
[ using 749064 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 867 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,PSN,MMX,FXSR,SSE
real mem = 1073278976 (1023MB)
avail mem = 1044758528 (996MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/30/04, BIOS32 rev. 0 @ 0xe7650
pcibios0 at bios0: rev 2.1 @ 0xe76c0/0x600
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 7 9 10 11
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
pcibios0: PCI bus #4 is the last bus
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 1
ppb0 at pci1 dev 0 function 0 "Intel 21154AE/BE PCI-PCI" rev 0x00
pci2 at ppb0 bus 2
fxp0 at pci2 dev 3 function 0 "Intel 82559ER" rev 0x10, i82551: irq 11,
address ff:ff:ff:ff:ff:ff
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 4 function 0 "Intel 82559ER" rev 0x10, i82551: irq 11,
address ff:ff:ff:ff:ff:ff
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
fxp2 at pci2 dev 5 function 0 "Intel 82559ER" rev 0x10, i82551: irq 11,
address ff:ff:ff:ff:ff:ff
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4
fxp3 at pci2 dev 6 function 0 "Intel 82559ER" rev 0x10, i82551: irq 11,
address ff:ff:ff:ff:ff:ff
inphy3 at fxp3 phy 1: i82555 10/100 PHY, rev. 4
ppb1 at pci1 dev 2 function 0 "Intel 21154AE/BE PCI-PCI" rev 0x00
pci3 at ppb1 bus 3
dc0 at pci3 dev 5 function 0 "DEC 21142/3" rev 0x41: irq 10, address
00:00:00:00:00:00
bmtphy0 at dc0 phy 1: BCM5221 100baseTX PHY, rev. 4
dc1 at pci3 dev 6 function 0 "DEC 21142/3" rev 0x41: irq 10, address
00:00:00:00:00:00
bmtphy1 at dc1 phy 1: BCM5221 100baseTX PHY, rev. 4
cbb0 at pci0 dev 9 function 0 "TI PCI1420 CardBus" rev 0x00: couldn't
map interrupt
cbb1 at pci0 dev 9 function 1 "TI PCI1420 CardBus" rev 0x00: couldn't
map interrupt
ubsec0 at pci0 dev 10 function 0 "Broadcom 5802" rev 0x01: 3DES MD5 SHA1
RNG PK, irq 11
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x51: polling
iic0 at piixpm0
lmenv0 at iic0 addr 0x2d: lm87 rev 6, starting scan
lmenv1 at iic0 addr 0x2e: lm87 rev 6, starting scan
spdmem0 at iic0 addr 0x50: 512MB SDRAM registered ECC PC133CL2
spdmem1 at iic0 addr 0x51: 512MB SDRAM registered ECC PC133CL2
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2040AS>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04:
irq 11, version 1.0, legacy support
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
