On 2014/09/19 08:21, Stan Gammons wrote: > On Sep 19, 2014 8:06 AM, "Stuart Henderson" <[email protected]> wrote: > > > > On 2014/09/19 07:37, Stan Gammons wrote: > > > I have an apc usb ups that was working with OpenBSD 5.5 stable, but > when I > > > installed 5.6 current nut no longer recognizes the status change when > the > > > UPS goes on battery. When you do upsc apcusb@localhost with AC power > > > removed from the unit, it indicates the UPS is still online rather than > > > being on battery. After some debugging help from the folks on the nut > > > list, the only thing I see is a libusb error that says > > > "libusb_get_interrupt: Function not implemented" Any ideas what might > have > > > changed in libusb1 to cause this to no longer work? > > > > There have been no code changes to the libusb1 port since OpenBSD 5.4. > > > > Also no changes to libusb-compat since 5.5. > > > > Ok. I guess going back to 5.5 is about the only solution. Or try upd and > sensord to see if that might work. Not sure that will work though.
How does your dmesg look with upd disabled?
