On 09/19/14 08:33, Stuart Henderson wrote:
On 2014/09/19 14:26, Stuart Henderson wrote:
On 2014/09/19 08:21, Stan Gammons wrote:
On Sep 19, 2014 8:06 AM, "Stuart Henderson" <[email protected]> wrote:
On 2014/09/19 07:37, Stan Gammons wrote:
I have an apc usb ups that was working with OpenBSD 5.5 stable, but
when I
installed 5.6 current nut no longer recognizes the status change when
the
UPS goes on battery. When you do upsc apcusb@localhost with AC power
removed from the unit, it indicates the UPS is still online rather than
being on battery. After some debugging help from the folks on the nut
list, the only thing I see is a libusb error that says
"libusb_get_interrupt: Function not implemented" Any ideas what might
have
changed in libusb1 to cause this to no longer work?
There have been no code changes to the libusb1 port since OpenBSD 5.4.
Also no changes to libusb-compat since 5.5.
Ok. I guess going back to 5.5 is about the only solution. Or try upd and
sensord to see if that might work. Not sure that will work though.
How does your dmesg look with upd disabled?
Ah - you already sent the dmesg for that.. To get NUT to work properly
I think you will need to add this and build a new kernel. This knocks it
out from attaching as a HID device (as needed for upd) - attaching as a
HID device means that libusb has less control over it.
A better solution would be to allow the device to attach to upd, and write a
NUT driver that queries the hw.sensors sysctls rather than having NUT talk
USB to the device.
Index: usb_quirks.c
===================================================================
RCS file: /cvs/src/sys/dev/usb/usb_quirks.c,v
retrieving revision 1.73
diff -u -p -r1.73 usb_quirks.c
--- usb_quirks.c 20 Mar 2014 15:07:11 -0000 1.73
+++ usb_quirks.c 19 Sep 2014 13:29:43 -0000
@@ -109,6 +109,8 @@ const struct usbd_quirk_entry {
{ USB_VENDOR_NEC, USB_PRODUCT_NEC_PICTY920, ANY, { UQ_BROKEN_BIDIR }},
{ USB_VENDOR_NEC, USB_PRODUCT_NEC_PICTY800, ANY, { UQ_BROKEN_BIDIR }},
+ { USB_VENDOR_APC, USB_PRODUCT_APC_UPS, ANY, { UQ_BAD_HID }},
+ { USB_VENDOR_APC, USB_PRODUCT_APC_UPS5G, ANY, { UQ_BAD_HID }},
{ USB_VENDOR_APPLE, USB_PRODUCT_APPLE_IPHONE, ANY, {
UQ_BAD_HID }},
{ USB_VENDOR_APPLE, USB_PRODUCT_APPLE_IPHONE_3G, ANY, { UQ_BAD_HID }},
{ USB_VENDOR_APPLE, USB_PRODUCT_APPLE_IPHONE_3GS, ANY, { UQ_BAD_HID }},
I manually edited usb_quirks.c and added the lines above. upd disabled
at boot and that seems to have fixed the problem. I see the status
change now.
Sep 19 16:02:39 game upsmon[17770]: UPS apcusb@localhost on battery
Sep 19 16:03:04 game upsmon[17770]: UPS apcusb@localhost on line power
Thanks!
Stan
