On 2015/04/30 22:48, Jonathan Gray wrote:
> On Thu, Apr 30, 2015 at 01:13:36PM +0100, Stuart Henderson wrote:
> > Diff below allows ix(4) to support 1Gb LX SFP in its SFP+ port. It is
> > https://github.com/torvalds/linux/commit/345be204dcbb2cc7580a63bc377a185125a6f822.patch
> > ported to our driver. Small changes to the 3rd hunk of the ixgbe_phy.c
> > patch as we don't have the "enforce_sfp" flag that Linux has.
> >
> > Goes from this:
> >
> > ix1 at pci1 dev 0 function 1 "Intel 82599" rev 0x01: Unsupported SFP+ Module
> >
> > to a working interface, albeit with wrong media flag in ifconfig:
> >
> > # ifconfig ix1
> > ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> > lladdr 00:1b:21:c0:25:bd
> > priority: 0
> > groups: egress
> > media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
> > status: active
> > inet 192.168.42.216 netmask 0xffffff00 broadcast 192.168.42.255
> >
> > OK?
>
> Do you get the correct media type with the following diff?
Yes I do, thanks. OK.
ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1b:21:c0:25:bd
priority: 0
groups: backbone
media: Ethernet autoselect (1000baseLX full-duplex,rxpause,txpause)
status: active
<snip>
> Index: ixgbe_82599.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/pci/ixgbe_82599.c,v
> retrieving revision 1.10
> diff -u -p -r1.10 ixgbe_82599.c
> --- ixgbe_82599.c 5 Aug 2013 19:58:06 -0000 1.10
> +++ ixgbe_82599.c 30 Apr 2015 12:42:56 -0000
> @@ -1580,6 +1580,8 @@ sfp_check:
> physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
> else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
> physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
> + else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE)
> + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_LX;
> break;
> default:
> break;
> Index: ixgbe_type.h
> ===================================================================
> RCS file: /cvs/src/sys/dev/pci/ixgbe_type.h,v
> retrieving revision 1.20
> diff -u -p -r1.20 ixgbe_type.h
> --- ixgbe_type.h 25 Aug 2014 14:26:25 -0000 1.20
> +++ ixgbe_type.h 30 Apr 2015 12:41:44 -0000
> @@ -2591,6 +2591,7 @@ typedef uint32_t ixgbe_physical_layer;
> #define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
> #define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
> #define IXGBE_PHYSICAL_LAYER_1000BASE_SX 0x4000
> +#define IXGBE_PHYSICAL_LAYER_1000BASE_LX 0x8000
>
> /* Flow Control Data Sheet defined values
> * Calculation and defines taken from 802.1bb Annex O
> Index: if_ix.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/pci/if_ix.c,v
> retrieving revision 1.118
> diff -u -p -r1.118 if_ix.c
> --- if_ix.c 20 Mar 2015 10:41:15 -0000 1.118
> +++ if_ix.c 30 Apr 2015 12:41:37 -0000
> @@ -953,8 +953,15 @@ ixgbe_media_status(struct ifnet * ifp, s
> ifmr->ifm_active |= IFM_100_TX | IFM_FDX;
> break;
> case IXGBE_LINK_SPEED_1GB_FULL:
> - ifmr->ifm_active |= ((sc->optics == IFM_1000_SX) ?
> - IFM_1000_SX : IFM_1000_T) | IFM_FDX;
> + switch (sc->optics) {
> + case IFM_1000_SX:
> + case IFM_1000_LX:
> + ifmr->ifm_active |= sc->optics | IFM_FDX;
> + break;
> + default:
> + ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
> + break;
> + }
> break;
> case IXGBE_LINK_SPEED_10GB_FULL:
> ifmr->ifm_active |= sc->optics | IFM_FDX;
> @@ -1407,6 +1414,8 @@ ixgbe_setup_optics(struct ix_softc *sc)
> sc->optics = IFM_10G_CX4;
> else if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_SX)
> sc->optics = IFM_1000_SX;
> + else if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_LX)
> + sc->optics = IFM_1000_LX;
> }
>
> /*********************************************************************
>