ok Stuart Henderson([email protected]) on 2015.11.17 11:33:50 +0000: > On 2015/11/17 11:47, Gerhard Roth wrote: > > Sensors marked as invalid should be excluded by snmpd(8) from the sensors > > MIB just as sysctl(8) excludes them from the 'hw.sensors' tree. > > Agreed - any OKs to commit? > > After: > > $ snmptable -v2c -c public 127.0.0.1 sensorTable > SNMP table: OPENBSD-SENSORS-MIB::sensorTable > > sensorIndex sensorDescr sensorType sensorDevice sensorValue > sensorUnits sensorStatus > 1 "temp0" temperature "cpu0" "36.00" > "degC" unspecified > 2 "zone temperature" temperature "acpitz0" "27.80" > "degC" unspecified > 3 "zone temperature" temperature "acpitz1" "29.80" > "degC" unspecified > 4 "temp0" temperature "sdtemp0" "34.25" > "degC" unspecified > 5 "temp0" temperature "sdtemp1" "33.50" > "degC" unspecified > 6 "inner" temperature "ugold0" "21.37" > "degC" unspecified > 7 "sd3" drive "softraid0" "online" > "" ok > > Before: > > $ snmptable -v2c -c public 127.0.0.1 sensorTable > SNMP table: OPENBSD-SENSORS-MIB::sensorTable > > sensorIndex sensorDescr sensorType sensorDevice sensorValue > sensorUnits sensorStatus > 1 "temp0" temperature "cpu0" "38.00" > "degC" unspecified > 2 "zone temperature" temperature "acpitz0" "27.80" > "degC" unspecified > 3 "zone temperature" temperature "acpitz1" "29.80" > "degC" unspecified > 4 "voltage" voltsdc "acpibat0" "0.00" > "V DC" unspecified > 5 "current voltage" voltsdc "acpibat0" "0.00" > "V DC" unspecified > 6 "rate" power "acpibat0" "0.00" > "W" unspecified > 7 "last full capacity" watthour "acpibat0" "0.00" > "Wh" unspecified > 8 "warning capacity" watthour "acpibat0" "0.00" > "Wh" unspecified > 9 "low capacity" watthour "acpibat0" "0.00" > "Wh" unspecified > 10 "remaining capacity" watthour "acpibat0" "0.00" > "Wh" unspecified > 11 "design capacity" watthour "acpibat0" "0.00" > "Wh" unspecified > 12 "battery removed" raw "acpibat0" "0" > "" unspecified > 13 "voltage" voltsdc "acpibat1" "0.00" > "V DC" unspecified > 14 "current voltage" voltsdc "acpibat1" "0.00" > "V DC" unspecified > 15 "rate" power "acpibat1" "0.00" > "W" unspecified > 16 "last full capacity" watthour "acpibat1" "0.00" > "Wh" unspecified > 17 "warning capacity" watthour "acpibat1" "0.00" > "Wh" unspecified > 18 "low capacity" watthour "acpibat1" "0.00" > "Wh" unspecified > 19 "remaining capacity" watthour "acpibat1" "0.00" > "Wh" unspecified > 20 "design capacity" watthour "acpibat1" "0.00" > "Wh" unspecified > 21 "battery removed" raw "acpibat1" "0" > "" unspecified > 22 "voltage" voltsdc "acpibat2" "0.00" > "V DC" unspecified > 23 "current voltage" voltsdc "acpibat2" "0.00" > "V DC" unspecified > 24 "rate" power "acpibat2" "0.00" > "W" unspecified > 25 "last full capacity" watthour "acpibat2" "0.00" > "Wh" unspecified > 26 "warning capacity" watthour "acpibat2" "0.00" > "Wh" unspecified > 27 "low capacity" watthour "acpibat2" "0.00" > "Wh" unspecified > 28 "remaining capacity" watthour "acpibat2" "0.00" > "Wh" unspecified > 29 "design capacity" watthour "acpibat2" "0.00" > "Wh" unspecified > 30 "battery removed" raw "acpibat2" "0" > "" unspecified > 31 "temp0" temperature "sdtemp0" "34.50" > "degC" unspecified > 32 "temp0" temperature "sdtemp1" "33.75" > "degC" unspecified > 33 "inner" temperature "ugold0" "21.25" > "degC" unspecified > 34 "sd3" drive "softraid0" "online" > "" ok >
--
