s...@stsp.name (Stefan Sperling), 2015.12.16 (Wed) 15:35 (CET):
> This diff adds 11n MCS 0-7 with A-MPDU and A-MSDU Rx to the iwn(4) driver.
>
> It also tweaks replay detection for CCMP encrypted frames, which needed
> tweaking for A-MPDU anyway (see comments in code). Even in non-11n modes
> this driver was discarding some retransmitted frames for no good reason.
>
> This driver supports a very wide range of hardware so please test this
> with as many iwn(4) adapters as possible. If we don't get enough tests
> this change may not be able to make the 5.9 release.
>
> Works for me on:
> iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi,
> MIMO 2T2R, MoW
>
> Please post here or let me know in private which hardware you're
> testing on. Thanks.
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO
3T3R, MoW, address 00:21:6a:8c:3d:9c
Does not link up with my access point as usual.
An usb wifi dongle (run) does, contents of hostname.if are the same.
iwn0 in debug mode says:
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
Fetched bsd.rd from ftp.openbsd.org directly. No mirror had the Dec 17
1:17 build already. Booted from SSD/bsd.rd and installed onto USB Stick.
Booted from USB, ran fw_update -a.
dmesg of three boots: install, normal boot, normal boot with iwn debug.
followed by pcidump and usbdevs. acpidump available.
Bye, Marcus
OpenBSD 5.8-current (RAMDISK_CD) #1587: Thu Dec 17 01:22:12 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4166717440 (3973MB)
avail mem = 4038721536 (3851MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "6DET72WW (3.22 )" date 10/25/2012
bios0: LENOVO 7470W1W
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR
SSDT SSDT SSDT
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.29 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 265MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
00:1f:16:32:df:5c
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R,
MoW, address 00:21:6a:8c:3d:9c
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 13
"Intel 82801IEM LPC" rev 0x03 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SanDisk SDSSDHII, X312> SCSI3 0/direct
fixed naa.5001b44e1d7ef244
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
"Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
run0 at uhub0 port 1 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev
2.00/1.01 addr 2
run0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T2R), address
00:1b:11:c6:b1:45
"Chicony Electronics Co., Ltd. product 0x480c" rev 2.00/31.34 addr 3 at uhub0
port 6 not configured
umass0 at uhub1 port 1 configuration 1 interface 0 "Generic Mass Storage" rev
2.00/1.0e addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2 0/direct
removable
sd1: 7680MB, 512 bytes/sector, 15728640 sectors
umass1 at uhub1 port 6 configuration 1 interface 0 "RICOH USB2.0-FLASH Media"
rev 2.00/0.01 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
probe(umass1:1:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Aborted Command
ASC/ASCQ: ASC 0x00 ASCQ 0x06
sd2 at scsibus2 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct
removable serial.05ca1880R5U880-00003
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
urtw0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x0bda
RTL8187_Wireless_LAN_Adapter" rev 2.00/1.00 addr 4
urtw0: RTL8187 rev 0x04, RFv2, address 00:18:e7:1d:c6:72
urtw0 detached
syncing disks... run0 detached
done
rebooting...
OpenBSD 5.8-current (GENERIC.MP) #1752: Thu Dec 17 01:17:05 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4166717440 (3973MB)
avail mem = 4036304896 (3849MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "6DET72WW (3.22 )" date 10/25/2012
bios0: LENOVO 7470W1W
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR
SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4)
EXP3(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.31 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 104 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "93P5030" serial 165 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 1862 MHz: speeds: 1867, 1866, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x800
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
00:1f:16:32:df:5c
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R,
MoW, address 00:21:6a:8c:3d:9c
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 13
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDHII, X312> SCSI3 0/direct
fixed naa.5001b44e1d7ef244
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Lenovo product 0x480c" rev
2.00/31.34 addr 2
umass0 at uhub1 port 1 configuration 1 interface 0 "Generic Mass Storage" rev
2.00/1.0e addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2 0/direct
removable
sd1: 7680MB, 512 bytes/sector, 15728640 sectors
umass1 at uhub1 port 6 configuration 1 interface 0 "RICOH USB2.0-FLASH Media"
rev 2.00/0.01 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
probe(umass1:1:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Aborted Command
ASC/ASCQ: I/O Process Terminated
sd2 at scsibus3 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct
removable serial.05ca1880R5U880-00003
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd1a (21f0b3cdd8d0af2e.a) swap on sd1b dump on sd1b
video0 at uvideo0
run0 at uhub0 port 1 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev
2.00/1.01 addr 3
run0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T2R), address
00:1b:11:c6:b1:45
run0 detached
urtw0 at uhub0 port 1 configuration 1 interface 0 "Realtek RTL8187" rev
2.00/1.00 addr 3
urtw0: RTL8187 rev 0x04, RFv2, address 00:18:e7:1d:c6:72
urtw0 detached
run0 at uhub0 port 1 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev
2.00/1.01 addr 3
run0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T2R), address
00:1b:11:c6:b1:45
urtw0 at uhub1 port 2 configuration 1 interface 0 "Realtek RTL8187" rev
2.00/1.00 addr 4
urtw0: RTL8187 rev 0x04, RFv2, address 00:18:e7:1d:c6:72
syncing disks... done
rebooting...
OpenBSD 5.8-current (GENERIC.MP) #1752: Thu Dec 17 01:17:05 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4166717440 (3973MB)
avail mem = 4036304896 (3849MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "6DET72WW (3.22 )" date 10/25/2012
bios0: LENOVO 7470W1W
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR
SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4)
EXP3(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.27 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 265MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 104 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "93P5030" serial 165 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 1862 MHz: speeds: 1867, 1866, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x800
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
00:1f:16:32:df:5c
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R,
MoW, address 00:21:6a:8c:3d:9c
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 13
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDHII, X312> SCSI3 0/direct
fixed naa.5001b44e1d7ef244
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Lenovo product 0x480c" rev
2.00/31.34 addr 2
umass0 at uhub1 port 1 configuration 1 interface 0 "Generic Mass Storage" rev
2.00/1.0e addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2 0/direct
removable
sd1: 7680MB, 512 bytes/sector, 15728640 sectors
umass1 at uhub1 port 6 configuration 1 interface 0 "RICOH USB2.0-FLASH Media"
rev 2.00/0.01 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
probe(umass1:1:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Aborted Command
ASC/ASCQ: I/O Process Terminated
sd2 at scsibus3 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct
removable serial.05ca1880R5U880-00003
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd1a (21f0b3cdd8d0af2e.a) swap on sd1b dump on sd1b
video0 at uvideo0
iwn0: begin active scan
iwn0: received probe_resp from 00:08:30:5d:ed:f4 rssi -87 mode 11n
iwn0: received beacon from 00:08:30:5d:ed:f0 rssi -89 mode 11n
iwn0: received probe_resp from 00:08:30:5d:ed:fa rssi -88 mode 11n
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -43 mode 11n
iwn0: received beacon from c0:a0:bb:f5:14:84 rssi -42 mode 11n
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -44 mode 11n
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -56 mode 11n
iwn0: received beacon from 80:1f:02:c1:fd:86 rssi -53 mode 11n
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11n
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11n
iwn0: received probe_resp from a0:2b:b8:6c:89:9f rssi -90 mode 11n
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -87 mode 11n
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -77 mode 11n
iwn0: end active scan
iwn0: end active scan
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -45 mode 11b
iwn0: received probe_resp from 3c:47:11:6b:5a:2d rssi -84 mode 11b
iwn0: received beacon from e8:40:f2:16:07:e7 rssi -89 mode 11b
iwn0: received beacon from 00:08:30:5d:ed:f2 rssi -89 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -42 mode 11b
iwn0: received beacon from 00:8e:f2:51:5b:22 rssi -87 mode 11b
iwn0: received beacon from 80:1f:02:c1:fd:86 rssi -58 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -83 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -84 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -70 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -56 mode 11b
iwn0: received beacon from 00:08:30:5d:ed:f6 rssi -89 mode 11b
iwn0: received probe_resp from 3c:47:11:6b:5a:2d rssi -84 mode 11b
iwn0: received beacon from 00:08:30:5d:ed:f1 rssi -88 mode 11b
iwn0: received beacon from 00:08:30:5d:ed:f3 rssi -87 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -42 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:84 rssi -40 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -57 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -56 mode 11b
iwn0: received probe_resp from a0:2b:b8:6c:89:9f rssi -91 mode 11b
iwn0: received beacon from 68:a0:f6:99:35:38 rssi -87 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -83 mode 11b
iwn0: received beacon from a4:b1:e9:9e:e8:3c rssi -82 mode 11b
iwn0: received beacon from 00:1a:2b:5d:92:82 rssi -87 mode 11b
iwn0: received beacon from 00:1d:d1:9e:9a:f0 rssi -88 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -84 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:86 rssi -75 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -56 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -43 mode 11b
iwn0: received probe_resp from 3c:47:11:6b:5a:2d rssi -83 mode 11b
iwn0: received beacon from e8:40:f2:16:07:e7 rssi -87 mode 11b
iwn0: received beacon from 00:08:30:5d:ed:f4 rssi -89 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -42 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -43 mode 11b
iwn0: received beacon from 00:8e:f2:51:5b:22 rssi -87 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -57 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -59 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -82 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -84 mode 11b
iwn0: received probe_resp from 00:1a:2b:5d:92:82 rssi -83 mode 11b
iwn0: received probe_resp from 00:1a:2b:5d:92:82 rssi -85 mode 11b
iwn0: received probe_resp from 00:1a:2b:5d:92:82 rssi -84 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -75 mode 11b
iwn0: received beacon from 00:21:29:83:65:6e rssi -88 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -43 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -40 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:84 rssi -42 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -44 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -58 mode 11b
iwn0: received beacon from 30:39:f2:33:55:96 rssi -89 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -53 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received beacon from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -74 mode 11b
iwn0: received beacon from a4:b1:e9:9e:e8:3c rssi -86 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -83 mode 11b
iwn0: received probe_resp from 00:1d:d1:9e:9a:f0 rssi -85 mode 11b
iwn0: received beacon from 00:1d:d1:9e:9a:f0 rssi -85 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -77 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:86 rssi -74 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -44 mode 11b
iwn0: received probe_resp from 3c:47:11:6b:5a:2d rssi -83 mode 11b
iwn0: received probe_resp from 00:08:30:5d:ed:fa rssi -87 mode 11b
iwn0: received beacon from 3c:47:11:6b:5a:2d rssi -83 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -43 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -44 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:84 rssi -44 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -57 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received probe_resp from a0:2b:b8:6c:89:9f rssi -90 mode 11b
iwn0: received beacon from 40:4a:03:42:16:7b rssi -88 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -85 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -73 mode 11b
iwn0: received probe_resp from 00:1d:d1:9e:9a:f0 rssi -85 mode 11b
iwn0: received probe_resp from 00:21:29:83:65:6e rssi -87 mode 11b
iwn0: received probe_resp from 00:1d:d1:9e:9a:f0 rssi -87 mode 11b
iwn0: received beacon from a4:b1:e9:9e:e8:3c rssi -86 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -82 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received probe_resp from 3c:47:11:6b:5a:2d rssi -83 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:84 rssi -41 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -42 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -51 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -58 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -56 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received beacon from 80:1f:02:c1:fd:86 rssi -71 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -86 mode 11b
iwn0: received probe_resp from e8:94:f6:29:83:b0 rssi -88 mode 11b
iwn0: received beacon from e8:94:f6:29:83:b0 rssi -87 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -56 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -56 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -41 mode 11b
iwn0: received probe_resp from 3c:47:11:6b:5a:2d rssi -83 mode 11b
iwn0: received beacon from 00:08:30:5d:ed:f3 rssi -88 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -41 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -42 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:84 rssi -41 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received beacon from d8:5d:4c:9c:de:46 rssi -82 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -61 mode 11b
iwn0: received beacon from 40:4a:03:42:16:7b rssi -89 mode 11b
iwn0: received beacon from 68:a0:f6:99:35:38 rssi -84 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -85 mode 11b
iwn0: received probe_resp from 00:1d:d1:9e:9a:f0 rssi -85 mode 11b
iwn0: received beacon from a4:b1:e9:9e:e8:3c rssi -82 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -83 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -53 mode 11b
iwn0: received beacon from 00:08:30:5d:ed:f9 rssi -88 mode 11b
iwn0: received beacon from e8:40:f2:16:07:e7 rssi -89 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -42 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -43 mode 11b
iwn0: received beacon from 00:8e:f2:51:5b:22 rssi -88 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -59 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -56 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -56 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -82 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -85 mode 11b
iwn0: received probe_resp from 00:1d:d1:9e:9a:f0 rssi -83 mode 11b
iwn0: received probe_resp from 00:1d:d1:9e:9a:f0 rssi -86 mode 11b
iwn0: received beacon from 00:1d:2e:36:95:90 rssi -72 mode 11b
iwn0: received beacon from a4:b1:e9:9e:e8:3c rssi -86 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received probe_resp from 3c:47:11:6b:5a:2d rssi -81 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -43 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:84 rssi -42 mode 11b
iwn0: received probe_resp from c0:a0:bb:f5:14:84 rssi -43 mode 11b
iwn0: received beacon from 30:39:f2:33:55:96 rssi -89 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
iwn0: received beacon from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: received probe_resp from 80:1f:02:c1:fd:86 rssi -58 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -84 mode 11b
iwn0: received probe_resp from a4:b1:e9:9e:e8:3c rssi -83 mode 11b
iwn0: received beacon from 00:1a:2b:5d:92:82 rssi -86 mode 11b
iwn0: received probe_resp from 00:1a:2b:5d:92:82 rssi -84 mode 11b
iwn0: received beacon from 00:1d:d1:9e:9a:f0 rssi -87 mode 11b
iwn0: received beacon from c0:a0:bb:f5:14:86 rssi -73 mode 11b
iwn0: end active scan
iwn0: sending auth to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: sending assoc_req to 80:1f:02:c1:fd:86 on channel 5 mode 11b
iwn0: received auth from 80:1f:02:c1:fd:86 rssi -55 mode 11b
iwn0: association failed (status 18) for 80:1f:02:c1:fd:86
iwn0: received assoc_resp from 80:1f:02:c1:fd:86 rssi -54 mode 11b
run0 at uhub0 port 1 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev
2.00/1.01 addr 3
run0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T2R), address
00:1b:11:c6:b1:45
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ pcidump
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Domain /dev/pci0:
0:0:0: Intel GM45 Host
0x0000: Vendor ID: 8086 Product ID: 2a40
0x0004: Command: 0106 Status: 2090
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 07
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20e0
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:2:0: Intel GM45 Video
0x0000: Vendor ID: 8086 Product ID: 2a42
0x0004: Command: 0007 Status: 0090
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 07
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000f2000000/0x00400000
0x0018: BAR mem prefetchable 64bit addr: 0x00000000d0000000/0x10000000
0x0020: BAR io addr: 0x00001800/0x0008
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20e4
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
0x00d0: Capability 0x01: Power Management
State: D0
0:2:1: Intel GM45 Video
0x0000: Vendor ID: 8086 Product ID: 2a43
0x0004: Command: 0007 Status: 0090
0x0008: Class: 03 Subclass: 80 Interface: 00 Revision: 07
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000f2400000/0x00100000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20e4
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00d0: Capability 0x01: Power Management
State: D0
0:3:0: Intel GM45 HECI
0x0000: Vendor ID: 8086 Product ID: 2a44
0x0004: Command: 0006 Status: 0018
0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 07
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000f2826800/0x00000010
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20e6
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x008c: Capability 0x05: Message Signaled Interrupts (MSI)
0:25:0: Intel ICH9 IGP M AMT
0x0000: Vendor ID: 8086 Product ID: 10f5
0x0004: Command: 0107 Status: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xf2600000/0x00020000
0x0014: BAR mem 32bit addr: 0xf2625000/0x00001000
0x0018: BAR io addr: 0x00001840/0x0020
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20ee
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
State: D0
0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
0x00e0: Capability 0x13: PCI Advanced Features
0:26:0: Intel 82801I USB
0x0000: Vendor ID: 8086 Product ID: 2937
0x0004: Command: 0005 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00001860/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x13: PCI Advanced Features
0:26:1: Intel 82801I USB
0x0000: Vendor ID: 8086 Product ID: 2938
0x0004: Command: 0005 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00001880/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x13: PCI Advanced Features
0:26:2: Intel 82801I USB
0x0000: Vendor ID: 8086 Product ID: 2939
0x0004: Command: 0005 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x000018a0/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x13: PCI Advanced Features
0:26:7: Intel 82801I USB
0x0000: Vendor ID: 8086 Product ID: 293c
0x0004: Command: 0106 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xf2826c00/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f1
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 04 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0058: Capability 0x0a: Debug Port
0x0098: Capability 0x13: PCI Advanced Features
0:27:0: Intel 82801I HD Audio
0x0000: Vendor ID: 8086 Product ID: 293e
0x0004: Command: 0106 Status: 0010
0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x00000000f2620000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f2
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x10: PCI Express
0:28:0: Intel 82801I PCIE
0x0000: Vendor ID: 8086 Product ID: 2940
0x0004: Command: 0107 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: fff0 Memory Limit: 0000
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Bridge Control: 0004
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:1: Intel 82801I PCIE
0x0000: Vendor ID: 8086 Product ID: 2942
0x0004: Command: 0107 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 0000
0x0020: Memory Base: f250 Memory Limit: f250
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Bridge Control: 0004
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:3: Intel 82801I PCIE
0x0000: Vendor ID: 8086 Product ID: 2946
0x0004: Command: 0107 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 5 Subordinate Bus: 12
Secondary Latency Timer: 00
0x001c: I/O Base: 20 I/O Limit: 20 Secondary Status: 2000
0x0020: Memory Base: f000 Memory Limit: f1f0
0x0024: Prefetch Memory Base: f291 Prefetch Memory Limit: f291
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 04 Line: 0b Bridge Control: 0004
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:29:0: Intel 82801I USB
0x0000: Vendor ID: 8086 Product ID: 2934
0x0004: Command: 0005 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x000018c0/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x13: PCI Advanced Features
0:29:1: Intel 82801I USB
0x0000: Vendor ID: 8086 Product ID: 2935
0x0004: Command: 0005 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x000018e0/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x13: PCI Advanced Features
0:29:2: Intel 82801I USB
0x0000: Vendor ID: 8086 Product ID: 2936
0x0004: Command: 0005 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00001c00/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x13: PCI Advanced Features
0:29:7: Intel 82801I USB
0x0000: Vendor ID: 8086 Product ID: 293a
0x0004: Command: 0106 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xf2827000/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f1
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 04 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0058: Capability 0x0a: Debug Port
0x0098: Capability 0x13: PCI Advanced Features
0:30:0: Intel 82801BAM Hub-to-PCI
0x0000: Vendor ID: 8086 Product ID: 2448
0x0004: Command: 0107 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 01 Revision: 93
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 13 Subordinate Bus: 13
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2280
0x0020: Memory Base: fff0 Memory Limit: 0000
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00 Line: ff Bridge Control: 0004
0x0050: Capability 0x0d: PCI-PCI
0:31:0: Intel 82801IEM LPC
0x0000: Vendor ID: 8086 Product ID: 2917
0x0004: Command: 0007 Status: 0210
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f5
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:31:2: Intel 82801I AHCI
0x0000: Vendor ID: 8086 Product ID: 2929
0x0004: Command: 0007 Status: 02b0
0x0008: Class: 01 Subclass: 06 Interface: 01 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR io addr: 0x00001c48/0x0008
0x0014: BAR io addr: 0x0000183c/0x0004
0x0018: BAR io addr: 0x00001c40/0x0008
0x001c: BAR io addr: 0x00001838/0x0004
0x0020: BAR io addr: 0x00001c20/0x0020
0x0024: BAR mem 32bit addr: 0xf2826000/0x00000800
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f8
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x01: Power Management
State: D0
0x00a8: Capability 0x12: SATA
0x00b0: Capability 0x13: PCI Advanced Features
0:31:3: Intel 82801I SMBus
0x0000: Vendor ID: 8086 Product ID: 2930
0x0004: Command: 0103 Status: 0280
0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000f2827400/0x00000100
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00001c60/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 20f9
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
3:0:0: Intel WiFi Link 5300
0x0000: Vendor ID: 8086 Product ID: 4236
0x0004: Command: 0106 Status: 0010
0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 00
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x00000000f2500000/0x00002000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 1011
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
State: D0
0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
0x00e0: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ usbdevs
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 3: high speed, power 450 mA, config 1, 802.11 n WLAN(0x3c09),
Ralink(0x07d1), rev 1.01, iSerialNumber 1.0
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 2: high speed, power 100 mA, config 1, product 0x480c(0x480c),
Lenovo(0x17ef), rev 31.34
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, power 200 mA, config 1, Mass Storage(0x6387),
Generic(0x058f), rev 1.0e, iSerialNumber A3A5515E
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 3: high speed, power 300 mA, config 1, USB2.0-FLASH Media(0x1880),
RICOH(0x05ca), rev 0.01, iSerialNumber R5U880-00003
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb6:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb7:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
